Search results for query: *

This is off a 1970 Dodge Dart, the driver side is very worn but the passenger side is in much better shape This should be able to fit on 1967-72 darts or any other sister Plymouth model if I’m not mistaken. local pick up only Located in Van Nuys, CA $100 obo

This is off a 1970 Dodge Dart, the driver side is very worn but the passenger side is in much better shape This should be able to fit on 1967-72 darts or any other sister Plymouth model if I’m not mistaken. local pick up only Located in Van Nuys, CA $100 obo

Hey guys so the threads on the upper control arm ball joint got stripped when I was torquing in the ball joint. Just wondering what my options were in terms of fixes or if it’s just best if I go out and buy a new control arm with everything ready to go. thank you

Hello everyone I am looking for the clear plastic lens that goes over the display of the radio. The exact model of the radio is Bendix 2884 750 0BVD. Here is a picture of a radio that has the plastic on.

Any kind of cheap recommendations for an after marker gauge/ sender set up on a stock fuel tank on a 1970 dodge dart? I know bosch has a gauge and sender but the sender does not have the locking ring that is on the original sender so I'm not sure if that will work.

Hello everybody, I have a question about a front turn signal (passenger side) that is semi functioning. It will work when I signal right and flash when I turn the on the hazards, all with the headlight switch off but when the headlights are on it will not signal right and will only dimly flash...

Ordered wrong sized rings with a kit and couldn't return the rings so here we are. Standard Bore size $20 OBO

Here we have hub caps who belonged to someone who really liked curbs. If you're not into the vintage curb hitting look these always make for great wall decor. I'm currently running different dog dishes so I no longer need these. $40 OBO local pickup (Van Nuys/LA area)

The weird wooden tray thing does come off but it has been pretty handy during the time I was using the stand. It came with it when I bought it. $75 OBO 1000 Ib capacity

Starter I thought I was going to need but ended up not needing and forgetting that i had it.Would've been going on a stock 904 transmission w/stock 318. $30 OBO (Van Nuys/L.A) local pickup pref.

Great father-son welding project or classroom project Local pickup pref. (Van Nuys/LA area) $15 obo

6 ton capacity These are great jack stands but they are just too big for what I need to use them for. $35 OBO local pick up preferred (Van Nuys/L.A area)

hello everybody, i have a camshaft that i am planning on reusing for a 318. I'm just wondering if there is need to degree it as you would a brand new camshaft. thank you

hello everybody, currently i am replacing the piston rings on the original pistons from a 318 that has been honed out and the new rings seemed to have a significantly larger gap than what is recommended in the manual for a standard size. So thinking they were faulty i got another set but ended...

hi everybody, I'm looking a rear seat for a 1970 dodge dart. I really only need the bottom half but if you need to get rid of both parts I'll still gladly buy them. Local sellers preferred in the Los Angeles area thank you

Hi all, I am playing with thoughts of upgrading from a stock camshaft to something that is a nice streetable upgrade for an entirely stock engine, highway gears, and exhaust system. I am still learning so I'm not entirely familiar with the specs and technicalities of camshafts so I'm not sure...

Hi all, I am currently in the middle of trying to yank out the 318 engine for a rebuild out of a 1970 dodge dart with automatic transmission. I'm trying to take the engine out without the transmission and I'm stuck on how the torqueflite converter is suppose to be unbolted because it looks a...

Hi all I am currently running the stock smog distributor on a 318 without smog equipment which was removed before I had the car. I was wondering if it would be worth it to have it recurved, get a new one, or just leave it alone. thanks

Hey guys I am currently trying to tune my carb with a vacuum gauge and I'm wondering where specifically am I suppose to plug in the gauge because I can't seem to get a response from where I've been plugging it into. I am also having trouble getting a response from turning the A/F screws as well...

Does anyone know whether it would be advisable to use new front and rear intake gaskets because i know for some cars silicon is used in place of them because of the concern of the gaskets being blown out. thank you

Temp broke as I was installing it. Wondering how I would go about trying to get this off

Hey guys I was wondering whether 205 70R 14 and 225 70R 14 would fit on the front and rear respectively with stock 14 inch wheels. Gracias

I have a 1970 Dodge Dart swinger with a 318 v8 engine and I'm looking for a new drum brake for the front. I was wondering what size the front drum should be if I'm using 10 1/2 inch front brake shoes and if anyone could post some links for them. I'm also wondering where I could get the inner...

I'm trying to install a grommet in a 1970 Dodge Dart. Right now I have the grommet where it's suppose to be in the gas tank with the thicker side sticking out. Im having problems sticking in the tube where gas travels to the tank into the already installed grommet. I've tried silicone greases...

Currently looking for a windshield for a 1970 Dodge Dart 2 door hardtop. Would prefer to pick up locally in the Van Nuys/LA area. Thanks

Currently looking for a windshield for a 1970 Dodge Dart 2 door hardtop. Would prefer to pick up locally in the Van Nuys/LA area. Thanks.

Friend and I just finished drilling out the spot welds on the replacement roof but we're still fighting it to get it off completely. We're not sure if we're missing a step so some insight would help. Thanks.

Hey guys I bought an temp gauge Amazon.com: MATCC 2 Inch 52mm 100-250 Degree F Car Auto Water Temperature Gauge Backlight 12V: Automotive and was wondering how I would go about wiring it. The instructions say to connect it to the ignition switch but I'm not sure how to reach that or if we can...

hey guys. I could use some rear seats for a reasonable price if y'all have any to spare. Thanks!

So took out the cluster to inspect the gauges. There was a positive and negative charged wire on the alternator gauge. While i was sifting through things one of them sparked. I tried to put everything back together and now nothing is working. No lights, nothing on the dash, and car won't start...