Search results for query: *

SB Mopar Harland Sharp 1.6 Full Roller Rocker Arms + Mopar Performance Billet Hold Down Kit. Used, but in very nice condition. Rockers Part Number is S70026K. Price just for rocker arms new at Harland Sharp is $837.00. Asking $650.00 + Shipping for Rocker Arms and Hold Down kit. Located in...

Small Block Mopar Performer RPM Heads Stage 2 ported by Ryan Johnson from Shady Dell Speed Shop. • Fully reviewed (Valve spring pressures, height install, valve lapping, valve guide clearance). • 4 angles valve job • 2.02" intake valves / 1.60" exhaust valves. Both with 30° back cut • New Comp...

Like a new, that Super Victor was fully ported and gasket matched for Edelbrock 7276 intake gasket (2.30" x 1.17"). Located in Tiffin - IA. U$: 650.00 + Shipping

Hi Folks, Finally I could test my new set of Viking DA Shocks that I installed in my car. These shocks already improve my 60ft from 1.58 to 1.54 but I'm still having tire bouncing on the start. I'm using this setup on the Shocks: Front: Compression = 12, Rebound 2. Rear: Compression = 4...

Hi, I'm thinking in rebuild my current rear brake system. So my big concern is: what's the best system to use with footbrake? Disc or drum? Currently my car has 3300lbs, no brake booster just master cylinder and a Boss Hog converter 2800-3200 stall. Thanks

Hi guys, This is a question that always I've doubts... Which Spark Plug Heat should I use? Engine has 12.0:1 of compression ratio, Eddy Aluminum Heads, MSD 6AL and runs with Gasoline 95oct that has 25% of Ethanol (Federal Law). Currently I'm running with a NGK V-Power Heat 8. That's...

Hello Guys, Someone is already using the new Edelbrock Victor Heads? Thanks...

Hello guys, I did finish my first engine build and I was very impatient to discover how much HP I'll got... This engine is a 360ci with Edelbrock heads ported by me [email protected]", Ported Super Victor Intake and Might Demon 750. This engine produces 441WHP@6600 and 56,4Kgf/m@4800...

Hi, I'm finishing a rebuild on my 360 engine, but I made some upgrades like Edelbrock Cylinder Heads, Icon Forjed pistons and a new Camp Cams Solid Flat Tappet Camshaft. My concern is about the break in process... I did check the valve springs install height and pressure and everything...

Hello Guys, I'm changing the Camshaft and Valve springs... So I'm having some concerns if my current pushrods will resist at this new valve springs pressures. My current pushrods: Brand: Crane Cams Pushrod Tube Diameter: 5/16 in. Pushrod Material: Chromoly Wall Thickness (in): 0.050...

Hello Guys, Three months ago I decided change my J-Heads for a Edelbrock Performer RPM. After read a lot of articles, books and talking with some engine builders I decided porting the cylinder heads myself. I already make it in my J-Heads but just a Stage II and another guy finished the...

Hello Guys, I'm porting my new Edelbrock 6077 heads. I'm working the combustion chamber to keep all equally and improve more flow... I have a question about the spark plugs, I'm using this spark plug NGK R5672 A-8 (same that Brian Hafliger used in his article "How To Build A Pump-Gas 620hp...

Hello Guys, It's time to change my current cylinder heads. So I'm looking some options like Ported Eddy Performer, Indy 360-1 and Airwolf 220. The Airwolf looks me like the good option in cost vs benefits. I would like to know if someone are using the Airwolf 220 Cylinder Heads from Dr. Js...

Hello Guys, I'm thinking in buy a Indy 360-1 K1 upper end kit from Hughes Engines.:finga: http://www.hughesengines.com/Index/products.php?browse=category&level0=QS0gU21hbGwgQmxvY2sgIkxBIg==&level1=Q3lsaW5kZXIgSGVhZHMsIEFsdW1pbnVt&searchmode=partnumber&page=2&partid=23690 This heads have a...

Hello Guys, I'm having some problems with my Hurst V-Matic 2 Shifter. I have a 904 transmissions new! All rebuild kit TCI. In mode Drive is perfect! But, in manual shift mode "drag race", sometimes does not engage de first gear, sometimes does not engage third gear. I manually change the...

Hi, I'm thinking about subistitute my old hooker competition headers. Has anyone here ever used the schoenfeld headers? In performance engine, which would be best for a street car? Schoenfeld?? TTI?? In the last engine masters, engines mopar winners only used schoenfeld headers... I have...

Hi, I'm thinking about changing my old hooker headers. Has anyone here ever used the schoenfeld headers? In a matter of performance, which would be best for a street car? Schoenfeld?? TTI?? In the last engine masters, engines mopar winners only used schoenfeld headers... I have a 1977 Dodge...

Hi, I have a 1977 Brazilian Dodge Charger... My question is: What is the maximum of my HP 904 transmission survives? I did a rebuild of the transmission with the following parts: TCI Rebuild Kit: 129000 Boss Hog Converter: 3200 stall Mopar Performance Flexplate SFI aproved I have a 360...

Has anyone used 471" small block mopar stroker have built by SPEED O MOTIVE? I would like more information about this type of engine. Thanks...

Dear Friends, My name is Diego Jones. I live in Brazil and have a 1977' Brazilian Dodge Charger. A-Body with a 318 stroker 360 engine. I have some questions to which Intake Manifold to use in my engine. Engine Configuration: KB Hypereutetic Pistons OEM Connecting rods with ARP Screews...

Dear MoparManiacs My name is Diego Jones. I live in Brazil and have a 1977' Brazilian Dodge Charger. A-Body with a 318 stroker 360 engine. I use the engine crankshaft Mopar Performance, PN: DCC-5007257 318/340 main. Purchased at Summit Racing...