Search results for query: *

Here's how mine is done. Rubber covers headliner and sail panel over rubber.

The headliner doesn't interfere it can be in or out. The big issue is the sail panels. I will try and post a few pictures up tonight that will be helpful to show where the inside rubber flats fit in relation to the sail panels. Does your car have a fold down rear seat? Mine does. I am not...

I just installed my back glass last week in my 74 duster. I had the interior installed but ended up having to remove the seat bottom, door panels, sail trim to get the window in, LOL. The rear glass is difficult to install as it is very tight in the opening. I was able to leave the rear...

I have 2 1970 340 dusters, one is a four speed the other is a three speed. The 3 speed car has no reverse light. Not sure if that applies to 1972, but I would assume so.

Have to remove the seats, which isn't hard

Ledgendary is having a sale on right now. Just priced out some duster door panels.

Mine has a may 22 build date. Built at the Jefferson Avenue, MI plant. With a cardboard liner

So I'm not crazy then, lol. I will check my build date on my 74 duster with the cardboard liner. I do have a 75 dartsport and had a 76 dartsport and they did have the plastic liners

Are you a 100% sure on this? as I remember some of the holes did not line even line up as well as some clearance to the hinge or something. I was able to get it in but there were some differences to make it not worth the hassle to switch over. I was surprised when I found this out as well. I...

My 74 duster still has the cardboard one. I tried using a plastic one from a 76 duster and it would not fit. The dash frame was different if I recall. So I abandoned that and used a cardboard repo.

I am going to try that setup in a few months. I am just reassembling my 74 duster with a bench seat. I have the short b body pistol grip shifter. Before I took my car apart, with my measurements only it looked like it will work with the seat all the way back. I am tall so it might work for...

Look in the legendary auto interiors catalogue and you can likely find the info in there.

Can you post pictures of the swinger with a fold down rear seat? I have only seen dusters and dart sports (fastback models) with foldown rear seats. That might be why you are having difficulty.

John deere "blitz black" is an exact match. Your local john deere dealer will have it in a spray can or by the gallon.

I just looked at my pictures and they are no very good. I will take some more tonight (and clean the junk out of the trunk) and post them later tonight. As you can see in AdamR's picture there is carpet on the wheel well and the trunk floor. His does not have the felt on the inner quarter...

The quarter panels had a black felt glued on. I will post my pics in a while.

There is carpet on the wheelwells and a black felt glued to the quarter panels. I will post some pics tomorrow.

Just Ordered mine from Legendary. I ordered a front split bench with center armrest, rear foldown seat, vinyl top, and sunroof vinyl top piece. All for the sum of 779$ delivered to my door in Canada....177$ of that was for shipping (ouch). They did only give me 15% off as Hemimark pointed...

Legendary has 25% off and free shipping until Jan 15th. I am going to order some.

should just be bolted on at the pivot point

Go to the John Deere store and get a spray can called Blitz Black. It was a perfect match for my 70 duster. The paint is very good and sprays nice out of the can. Some people paint their entire car with this stuff for the satin look (it is available in quarts and gallons too). It was used...

I'd help you out with that one but the seats (and the whole interior) are out of my car right now. Hopefully someone else will have that for you.

Do you have plastic spacers under the seat tracks? The bucket seat abodies I have worked on have a round 3/4"? spacer under the seat tracks. I can't remember if it is under just the rear or the front too. Someone else might be able to help with the exact thickness and location. I had the...

I used John Deere "Blitz Black" for mine. It is an exact match of the factory color. To test it I painted half the glove box door and after it dried I could not see the difference. It is available in spray can for or by the gallon from your local John deere store. Make sure it is Blitz...

If you download this catalogue it has pictures of the seats. See page 13 http://www.legendaryautointeriors.com/files/ChryslerCatalog.pdf

I put an original tuff wheel on my 70 duster and used the spacer. Prior to that I had a grant wheel (not the tuff one) and my knees hit the wheel and of course the turn signal interfered. I am 6'2" tall so my seat is back fully. I was very satisfied with the tuff wheel spacer as it put the...

Thanks, I have one broken spring and I will weld it up when I recover the seats. Mine is sitting low too.

How long have you been using the seat since you welded the springs? I am contemplating doing the same.

If you have a picture of the buttom to release the seat back (tilt button), that will help identify it by year. If you have a picture of the seat bottom cushion and it will help too. This is still hidden in the second picture. The seat back looks odd the part were your back and shoulders fit...

A picture is worth a thousand words.......