Search results for query: *

If it's off try metermatch just google it, solved all my problems!

I've had my meter match installed for over 2 years with no issues.

I just watched the video on the speedway unit. If I understood it correctly you set it with an ohm range. Well if you have a non linear gauge and a linear sending unit ( as is the issue with aftermarket senders ) I don't see how it would work in that case. The sending unit would still be sending...

I'm using the meter match with an aftermarket sender. The sender also read empty and had @ 8 gal. of gas left in the tank. After installing the meter match and setting it up correctly it seems to be working well. I drained the tank buy hooking an elect. pump to the sending unit and let it run...

Cornernfool, how did you make out with the meter match??

RedFish, you are correct, meter match won't help that.

Mike, If your car has the same layout as my Demon you won't have to pull out the cluster to install the meter match. On my Demon the sending unit wire ran up the drivers side on the inside of the kick panel. I mounted the meter match under the kick panel with velcro. then I ran the power wire to...

I had the same issue on my Demon, I tried a few sending units and gauges. Last year I just got fed up and bought a meter match. Well not knowing how far the pickup was from the bottom of the tank. So I ran the car until I thought I was down to @ 4 gal. by milage. So I hooked an elect pump up to...

It sounds like you may have gotten a bad unit. I talked to a local guy that was having a similar issue. He told me he had to fill the tank and work backwards from there. Taking out 4 gal then set 3/4 tank ect. Didn't make sense to me but it worked for him. Brian is a stand up guy he will help...

Glad to help, I used all 4 points but that's just me, good luck and let me know how you make out. Tom

22dog22, How I did it was a little work. Knowing my tank was 16 gal. I ran it down to about 1/2 tank, then pulled the gas line off the sending unit. I hooked an elect. pump to the sending unit and pumped the last 8 gal. or so out. The reason I did it that way was to know when the car would...

Try Meter Match, this handy vice lets you calibrate your sender to the gauge. It really helped me get the gauge very close to accurate. Just google Meter match.

Same here @16

Does anyone have diagram or a pic of the charcoal cannister setup for a 1972 Demon 340? Mine was never setup and I want to set it up. Thanks Tom

X2 on the meter match, installed it on my Demon about 2 weeks ago. Now from what I can see my gauge is reading pretty darn accurate so far!!

How did you make out with your fuel gauge issue?

I installed the meter match on my Demon 340. After trying 3 different sending units and getting close to the same issue each time. The meter match gives you the option to set up to 4 points, I only set the high and low to keep it simple. Now the reading while not perfect, is pretty darn close. I...

I had somewhat the same problem, I got the gauge really close with metermatch. Google it, the unit is programmable it hooks up in line with your sending unit to gauge wire. I started with a full tank of fuel, set the meetermatch so the gauge read full. Ran the car till it was close to empty (By...

Yote, like I said if you need a picture of how mine looks just pm me your email address. Good Luck!!

They make a device called Meter Match, it is supposed to solve this problem according to their website. Anyone try this yet??

You run the line for the front danper to the first fitting on the bottom of the air cleaner. Then I ran a small piece of hose to the other fitting on the bottom and put a tee in that line one side went to trap door and the other I spliced into the vac advance with another tee. If you PM me your...

mguner, you are correct, now that I think about it . It does go to the breather cap. Thanks Tom

What is the I/D of the hose that runs from the air cleaner to the PCV valve on a 72 340. I would measure it but I'm at work and wanted to stop on the way home pick it up. Thanks PS: it's the stock trap door air cleaner.

Thanks!!

Does any one have a diagram of the vacuum lines for this air cleaner.?? Thanks Tom

rich006 please let us know what you find as their are a few of us having the same issue. Thanks

Thanks for the info, I'm 1/2 way through the thread now.

Hi, I'm finding out that a lot of us are having issues with our aftermarket fuel sending units. The issue being they are way off on accuracy, Has anyone tried one of these Meter Match devices?? They are supposed to allow you to "adjust" the sending unit to the gauge. Here is a link to the...

Well my buddy found me a nos fuel sending unit for the Demon. Santa helped deliver it to me, come on spring so I can see if it solves my fuel gauge issues.

I just located a nos sending unit, issue is the guy wants an arm & leg for it. I may bite the bullet on it to see if it solves the issue. I wont get a chance to put it in till spring, so I'm hoping someone finds a cheaper fix in the mean time.