Search results for query: *

4 post with a hydraulic jack on each end.Drive right up on it .Do not have to crawl around placing the arms in the correct position to balance the car.Bought one from greg smith equipment with 2 jacks best thing i ever bought no problems in 6 years it is a atlas brand

If you look at the name plate on the motor it will tell you what the full load amps of the motor is.The tag will probable say fla then a number like 2.5 means it draws 2.5 amps at full load your breaker needs to be double that because it draws more amps when it starts all motors do..Put a amp...

The cost of the drive is probably more than a motor.So why would you even consider this.I deal with industrial 3ph and vfds all the time

You wont be able to use a vfd it only allows you to change the speed of the motor.You still have to supply 3ph to the vfd.Just buy the correct motor or another compressor before you spend a bunch of money for nothing and have to buy one anyway.

No you can not use the 3 ph motor. You may have to buy a new motor.If you have to buy a new compressor make sure you get a 2 stage one.Better for air tools,sand blasters.

4 post, drive up on it no getting on your knees to put the arms out on two post .Buy the hydraulic jack that slides the length of lift to raise car to take off tires.One of the best things i have bought.

dont buy one for just using it to paint buy a 2 stage 7.5 hp and it will do blasting or anything else you want or you will be getting a bigger one later like i did

Make sure you get a 2 stage compressor not a single stage

Got a atlas brand from greg smith equip .Used it for 3 years no problems.$1900

get 7.5 hp 80 gallon tank 2 stage compressor you will need about a 40 amp breaker.This will do sandblasting and running grinder and da.Get a high cfm rating like 19 or more at 90 psi.Just went through all this