Search results for query: *

no. i like the "dim-ability" and soft mood lighting only incandescents give !

my 65 has a 1/4 or so gap between the connector and trace board. good idea to clean with scotchbrite pad and coat with diaelectric grease. My 65 center post is also "keyed" for alignment so it can only engage 1 way.

Found the problem: Took out the cluster, cleaned all the traces, replaced the bulbs, verified all the grounds, verified gages move with 6v applied (as in the above vid.), checked all the pins along the traces....all good. Turns out there was a corroded contact on one of the female sockets in...

Its the external voltage regulator that fits into 3 slots on the back of the tracer board, with 3 legs. I think the later chryslers used the same VR tied a capacitor to them, also externally. I cannot get either gage to spike by grounding the return side by the connector at the sensors OR by...

65 Barracuda - reawakening after 20+ yrs. of a driveway snooze. HERE is the LAST of the non functioning electrical issues.: No gas or temp gages working. Grounded out both: no gage movement on either.... assuming both can be tested the same way... SO...conventional wisdom would say its...

THis is a chevy guy...but theory should be the same? if in a mopar, do you do the install the same way????????

unrelated issues. i changed out the bulbs. in the same physical size, there #158 (3.38 watts), #1445 (1.94w) also shown LEDs HELLA 921LED5K LED Miniature Bulb 12V; 1W; and HELLA 921LED65K LED Miniature Bulb 12V; 10W; LIghting is better, but not real bright. Will the 10 watt LEDs work...

Putting a 65 Barracuda back together after 30yrs of non running driveway time. I cleaned all the board traces when the dash was out, and now have it put back together. Charging gauge works fine. Hi beam and oil lights work fine. All interior and exterior lights work fine. wiper fine...

Yes. There are the separate blades for the ammeter wires the are solid and located between the 2 BHC. There are 2, not 3 on the early As. Good call

you just left the ammeter connected then?

Since I have the dash and ALL the wiring out of the 65 Plymouth, now is the time to take the STOCK ammeter out of the circuit. Why? I want to go to a 45+ or 50 amp alternator, and I don't want to cook the stock ammeter. Gonna drive a stereo amp and higher output lighting...

65 Barracuda is getting a new drivetrain. All else is stock. Might as well do the "smart" wiring upgrade! electronic ignition. simplicity and reliability is key. NOT a show car by any means....just a weekend driver. looks like the HEI is the way to go. MP electronic "kit" is ~ $200...

76 is a one year only cluster. Yes, it uses traces. mike

pulled the cluster apart. found some corroded traces. cleaned them all up and checked resistance end to end. ammeter trace "open". Anyone know how to check the function of the ammeter, gas gauge and temp gauge out of the cluster? Mike

I have a basic dart cluster out of our 76 Dart. I'm looking to have it just tested out, and repaired as required. Not restored / repainted. The car is just a s6 driver and needs to work. recomendations? cost? turnaround time? thanks.

1965 Dart. S6 auto. all stock wiring except for HL relays and elect. ignition. Back wire harness all stock and all color codes are correct acc. to the shop manual diagram. Problem: Intermittent brake light outage. Most times, the brake lights work perfectly. Then only the right works, then...

Contact SlantSixDan for all the parts. I bought a relay kit from him (actually 2 kits), to do my 65 Dart and 73 Dart Sport. Its a really easy to do. You'll just need to buy 12 or 14g. wire to run to the new headlight sockets. He supplies all the harness pieces. OR I believe he'll make the...

Can anyone give me a comparison between the Sylvania H6024XV and the GE H6024NH ? No local parts store have the Night Hawks, but most have an "equivalent" (their term). What is your preference on bulbs?? any other suitable ones? Thanks....

er...nevermind. I've been corrected. :)

I've got one. Don't know if it works or not. Make an offer....shipping from NJ. If you want it, I'll pull it out as complete and intact as possible! Mike