Search results for query: *

thats not a worry. I'm doing the same thing. 5/16 stepped up to 3/8 entering the edelbrock.

any advantage to NOT running the timed vacuum advance on the MP distributor?????? I've seen many who don't....I don't see why......

I have the throttle pin and ordered the 1481 adapter part. I also just ordered the #1473 mopar linkage kit, which should give me the missing rods / clips and such. For Hook up: Im using the mopar electronic ignition, would the advance use the ported vacuum connection? thanks

I can lengthen the stock kickdown rod as needed....also modify the cable pull length..... So the 1481 looks to fit the bill. Also: looks like I"m missing the metal link bar from the secondary arm....going up to the "_______" (damper???) anyone have one or know the part number?

I'm getting ready to connect the Eddy 1406 carb to the 318 in the 65 barracuda. I'm going to run the stock style accel. cable. The engine and trans are 1984. Trans uses a floor shifter and will retain the 84 kickdown. How would you connect this? Pictures help. thanks

thanks RRR, you insight, simplistic view of all things mechanical, foresight, insight, hindsight....and of course, current sight are signs of genius. You have bridged the gap from mere mortal, to scholar of the institute of mechanically gifted. we are all in your shadow, and your debt. If...

but looking at the sender, it has a tab that seems to index with a notch in the tank opening. If using the big flat rubber gasket; the sender unit "tab" won't engage the tank notch. ......confused.......

On an A body....they replacement fuel sender unit comes with a flat gasket and lockring. 1 person said the correct stack is: gas tank, sender, gasket, lockring. 1 person said the correct stack is: gas tank, gasket, sender, lockring. who is right?????????????

X2 on Vans. never a problem for me. I always solvent wash and paint my tanks silver or multiple coats of clear, just to help them look clean for years....rear restoreres would frown on that for sure!

I always wet the gaskets with Hylomar by Permatex. A couple of years ago, Hylomar was sold, now there is Hylomar HP, which I believe is an acetone base. You wipe some on (like blue, tacky toothpaste), let it out-gas (acetone evaporate), then install. It never dries, always tacky, helps to...

I hate fords.....

thanks! It dropped right out! :prayer:

65bearacuda: I'm fixing this car up as a HS auto shop project. We certainly can use the tank, as ours is rotted and leaking! We'll probably break the J bolt, ruin the strap and destroy the sending unit as it all comes out! lol My HS kids can be pretty heavy handed at times! PM me...

How do you remove the gas tank from the 65 Barracuda? if you need to take out the interior pieces to get the filler neck out first...how do youdo that? specifics please...thanks!!!!!