Search results for query: *

HOW CAN YOU TELL IF A WHEEL IS POWDER COATED AND NOT PAINTED ? SEEMS TO ME WHEN I HAD THE REAR WHEELS MADE INTO 15 INCH 4 INCH PATTERN THAT STOCKTON WHEEL MIGHT HAVE POWDER COATED THE RIMS. USING PAINT ON A POWDER COATED RIM I THINK IS LOOKING FOR A PROMBLEM

GREAT THANKS. I KNOW I CAN GET THE MOPAR ARGENT BUT AT 20 DOLLARS A CAN I THOUGHT THE KRYLON WOULD BE A BETTER PRICE.

does anyone have a current part number for the krylon dull aluminum paint ? and is the center cap on the 71 rally's the same color as the wheel ? a light silver ?

Picture would be great.

now I feel twice as better knowing that :blob:

thanks for the input. I feel better knowing this

Hi folks Years ago I sent a pair of sbp ralley rims to Stockton wheel to be converted to a 15 inch by 8 inch wide rim bs is about 4 3/8. I have now noticed that the welds on the back side of the rim is in 4 places every 90 degrees about 5 inches long then there is a spot about the same...

i have them on my 68 cuda with 8 1/2 wide with 4 1/2 bs and off set ss springs. they may rub on the inside wheel well but the tire is so big that it is very close to the front qtr panel .if you try and move the rear back for clearance then your shocks may it your gas tank.at least for me. I like...

hi 64dartconv i have 4 stock rims. sent you a pm.

does anyone know if these are avalible in the 4 inch bolt pattern? terry

superbee, it did not do anything to the weight transfer that i could notice. i did use the mopar off set spring kit to get an extra 3/4 inch and everything lined up just fine. there is enough room for the brake lines to pull it back a good 1/2 inch. just be sure to measure all posible...

superbee i have a 68 barracuda with 255 x 70 x 15 which are 28 inch tall.i to thought that was not enough room in front of the tire so i just drilled a new hole in the shock plate and pulled the rear end back about 1/2 inch. i've been driving it like this for the past 4 years with no problem...

kevin i have a 68 cuda with ss springs and the 3/4 off set spring kit. i use a 255 x 60 15 inch steel raylle with 4 5/8 back space on a small bolt pattern. it fits the wheel well very nicely and i have about 1 1/4 inch from the sidewall to the leafspring. and your right the rear end sits up...

wow, for that price if there were a problem i'm sure just using the offset l shackle kit will do the trick. terry