Search results for query: *

Hi everybody: Im looking for a place to order a custom solid roller cam for my stroker, already call Howards but the estimated time for delivery is 16 weeks!! Also write to Comp and Hughes but havent an answer yet. Any recommendation on somebody? Don't want to wait 4 months for a cam. Need...

Hi: Does somebody knows if is possible to get an adapter plate to put a powerglide on a small block mopar, im looking just for the plate that goes bolted to the block

Hi: Im in the market for a new carb, just need some advice on the size, it's for a small block stroked to 414", all forged,.Bighmouth Eddy heads by Hughes, 254-264, 640-662 lift mechanical solid cam, Indy single plane intake, 1 7/8 headers, 10.6-1 compression. Tf 904, 4.56 with 28.5 tires, 4...

Hi: Looking for a set of forged pistons for a stroker sbm: 4.060 bore, 6 to 8 cc dome; just find the Wiseco K0011B6, and trying to see other options. Thanks.

Hi: Im gonna try to rise the compression ratio in my engine, the calculators say is 10.84 right now: 4.060X4.00, 73cc chamber, +5 cc piston, 0 deck, .039 gasket. It suposse to need 60 cc chamber to get to 12.57, so the question is: how much milling you think is needed? On thousands. Thanks

Hi: I'm just finished the rebuild on my stroker small block, but in the first passes, after proper break in, when I rev up it blows a lot of air and oil thru the valve cover breathers ( real mess) ; Obviously something's wrong, Everything was new, my builder says he cut the first ring to...

The new engine for the Duster os almost ready, here some images:

Hi: Looking for a carb for my stroked small block, mech solid cam, single plane intake , and finally get to this 2 options: Holley Ultra XP 950 80805BKX or Quickfuel Race-Q series RQ-950 (with the option to be annular or downleg) Any advice? Thanks in advance.

Hi: Today i receive 4 big boxes from Huges engines with a lot of new stuff: 60779 Big Mouth heads (225 int port ) Indy single plane intake Solid flat tappet cam 254/264@050, 640-656 lift, 112 ls (Planning 150-200 hp shot of nitrous ) 1 7/8 headers from TTI ARP main and head studs...

Hi: Looks like Airwolf heads are hard to get by the moment, somebody have any idea of any other options with similar specs? Thanks in advance

Hi: Im refreshing my sbm and planning on upgrade the top end, so gonna change the Eddy heads and Airgap for a set of Airwolfs (or something very similar) and Super Victor. Its an all forged bottom, flat top pistons, 12-1, 850 Holley Ultra Hp, 1 7/8 headers, 3800 converter (prob needs more...

Hi everybody: I think my combo is missing something because is slower than i may suposse, the most notorious at the big end, here's the list: 360 stroked to 416 4.060x 4.00 Flat top Icon pistons Eddy ported heads and RPM Airgap Holley Ultra HP 850 Custom Comp Cams mech flat tappet...

Hi: Need a set of custom pushrods for my sbm stroker with this specs: 5/16 Chromoly 7.250 in. total length Cup top tip style Any advice on a good place to build them as fast as possible

Hi: Just have my new cam: Comp cams mech flat tappet 251/259@050 573/597 lift 106 lobe sep. Its for a sbm 360 stroked to 416 Ported Edelbrock RPM cylinder heads 12.5:1 Comp. Crane 1.6 rocker arms Holley Ultra 850HP TF 904, trans pack, 4.56 geared 9 inch rearend Custom Edge Racing converter...

Hi: Ready to order a 712712-08 Howards mechanical flat tappet cam (254/260@050, .599/616 lift, 108 lobe separation) but cant find info about what springs, retainers and locks to use with it on some Edelbrock Performer Rpm heads for LA small block with Proform 1.5 shaft mounted roller rockers...

Hi: Have this combo on a 74 Plymouth Duster Stroked 360- 4.060X4.00 Forged rotaring assembly with Icon 744 flat top pistons 12:1 Ported Eddy heads and Airgap Holley Ultra HP 850 242/248@050, 549-546 lift hyd roller cam 1.5 shaft mounted roller rockers Tf 904, TCI 3000 rpms...

Hi everybody : Looking for a good place to order a custom solid flat cam for my stroked sbm, will apretiate any advice, thanks.

Hi: Thinking on change my carb, my engine is a 360 stroked to 416, ported RPM Airgap and Eddy heads, 12.5 to 1, 242/248@ .050 hyd roller cam. Checking the Pro systems and Bigs carbs, which one you think is better?

Hi everybody,this is my combo: dodge 360 060 over 4" crankshaft Icon 744 flat pistons Comp Cams 242/248@050, 549/544 lift Ported Eddy heads, aprox. 12.5 to 1 comp. Rpm airgap port matched 850 "]Holley Ultra carbs no. HLY-0-80804RD 904 with trans pak 3000 stall torque converter 9" rearend with...

Hi: looking for a set of 1 7/8 headers for a '74 Plymouth Duster, 416 small block, eddy heads, 904 trans, power steering; what's the best options?

Hi everybody: just get one of the new 850 "]Holley Ultra carbs no. HLY-0-80804RD for this combo: dodge 360 060 over 4" crankshaft Icon 744 flat pistons Comp Cams 242/248@050, 549/544 lift Ported Eddy heads Rpm airgap port matched 150hp nitrous 904 with trans pak 3000 stall torque converter 9"...

Hi everybody: just get one of the new 850 Holley Ultra carbs no. HLY-0-80804RD for this combo: dodge 360 060 over 4" crankshaft Icon 744 flat pistons Comp Cams 242/248@050, 549/544 lift Ported Eddy heads Rpm airgap port matched 150hp nitrous 904 with trans pak 3000 stall torque converter 9"...

Hi everybody: just get one of the new 850 Holley Ultra carbs no. HLY-0-80804RD for this combo: dodge 360 060 over 4" crankshaft Icon 744 flat pistons Comp Cams 242/248@050, 549/544 lift Ported Eddy heads Rpm airgap port matched 150hp nitrous 904 with trans pak 3000 stall torque converter 9"...

Hi everybody, this is my combo: '74 Plymouth Duster full interior 360 stroked to 416 4.00 in. stroke 060 over Icon 744 pistons Ported eddy heads 1 5/8 headers 20-814-9 comp cam 242/248 @050, 549/544 lift at 110, hydraulic roller Mallory box, distributor and cables 904 whit shift kit, 3000 stall...