Search results for query: *

On the door pulls on the inside of my car ( 1972 Demon 340 ). Can anyone tell me what thread size the rod that the pull to unlock on the door is? One of my original ones broke the other day. I have a new set but don't want to force thread them on if I can pretap them, or if someone can tell me a...

Hi, I'm looking for the size of 4 screws that go over and under the headlights on a 72 Demon. There are two on each headlight to hold the grill on, I also need two of the "slip nuts" for the same location. Thanks Tom Sorry for the duplicate thread.

Just wondering if anyone has tried this and how they liked it. Been seeing a lot of buzz about top coat F11 and was looking for some feedback on it. Thanks Tom

Hi, as anyone had this applied to their car? A few detail guys around here are swearing by them. I just had my Demon striped and repainted @ 16 months ago, so I was leary about this, so I wanted to throw it out here and see if anyone has any experience with it. The detailer told me he had to...

My 72 Demon 340 has matte black vinyl stripes, is it ok to use "quick detailer" on them when I wipe the car down? How about wax when I wax the car? Thanks

Hope this is the right place to post this. We recently finished my Demon, Body and Paint. Now the question I have is what is the best way to clean the engine compartment? It is mainly body dust and very light grime nothing major just hard to reach. I already blew out as much as I could with air...

Hey guys, my question is on my 72 Demon 340 the driver door is setup for the remote mirror. Now my question is on the inside of the door there is no provision to hold the cables out of the way. I wire tied them for now but would like a more permanent solution. What am I missing? Did some doors...

Is anyone reproducing these?

I have some mothers wax and sealer that over time got very thin. Even after shaking it for a good while it still seems very watery and milky colored not creamy like I remember it. Should I just toss it??

Any one have a recommendation on a good R/O buffer? There are so many to choose from, any one have any first hand experience with any?? Thanks

I just finished the matte black stripes on my 72 Demon 340. Now as I get ready to wax for the first time I was wondering if I have to tape off the stripes or wax over them. Thanks Tom

Putting my 72 Demon 340 back together after paint. When I went to install the Driver side remote mirror I noticed the new mirror did not come with the piece that backs the nut up. What I mean is the controller that comes through the door, when you try to tighten the nut to hold it to the door...

Well after 2 years of body work we finely shot the B3 72 Demon 340 @ a week ago. Base coat / Clear Coat, Starting the sanding (3) and the polishing (3) now. My Question is when to apply the stripe kit? Before or after the final waxing?? I purchased the stripe kit from Phoenix Graphics and don't...

On my 72 Demon 340 it looks like I'm going be bringing it home from Paint Prison in a few weeks. I was just curious on how you care for the "Matte Black" that they use on the center part of the hood and scoops. I'm told I should not wax it so is there anything to use to protect it? Any polish or...

Did the 72 Demon 340 have Dodge or Dart on the trunk or hood?? If yes does anyone have the part numbers for them?? Thanks Tom

Did the 72 Demon 340 have DODGE or DART on the hood or trunk?? I've seen them both ways and want to finish the car correct. If so where can I get them? Thanks

Has anyone had any experience with the AMD windshield And rear window trim for a duster/demon?? I'm looking at it For a 72 Demon. Thanks in advance for your input.

Does anyone make a Driver side rear Quarter lower patch panel for a 72 Demon ?? I need the one that is behind the wheel. Thanks

I see AMD makes the stainless steel windshield, Back Window and drip rail molding for Demons and Dusters now. I was hoping someone has tried it and could give me feedback on the fitment and finish on them. Thanks

I was hoping someone has experience with the AMD wind Shield, Back window and the new drip rail moldings. I just wanted to know how the fit was, were there any fitment issues I should be aware of. I'm looking at buying them for a 72 Demon. Thanks for the input.

I'm being told that the front bumper guards on a 71 / 72 Demon are different guards. I'm looking at a set from a 71 demon, and am being told that the ones for a 72 are different. Can anyone confirm or deny before I invest in them. Thanks

In about a month I'll be at the point everything will be ready to paint my demon 340. My one question is does anybody have the dimensions of the hood stripes for a 72. I have the stripes but I wanted to know what the measurement was between the two inner stripes. Also does anybody have the...

Looking for a complete stripe kit for a 72 Demon, has anyone used these guys? How was the detail and the Quality? I always like to use our vendors when possible. Thanks

Any one know where I can buy new bumperette rubber incerts for a 72 Demon?

Does anyone know who sells the 72 Demon Front Bumper with Jack Slots?? AMD doesn't have it they say it is a one year bumper, so am I Down to Re-chrome? If so can anybody recommend a chrome shop in the NJ area?

Who makes the most accurate strips sets for a 72 Demon 340?

Was this used on the Demon/Duster hoods? I have one shop saying yes and the other one saying no, it was used on the roadrunners,cudas ect. not A bodies. Thanks

On a 72 Demon the hood is blacked out in the center and the snorkel scoop. Can anyone tell me what black this actually is and where to buy it? Thanks Tom

Where is a good place to get a Repop Front bumper for a 72 Demon? Thanks

I have a 72 Demon, the person before me painted the black on the hood and scoop a Gloss black. I'm told that is incorrect, does anyone know the correct color? and where I can buy it? Thanks Tom