Search results for query: *

I have yet again a dead vacuum advance pod. I've gone through at least 3 in the last couple of years. Anyone else experience this? Is it just the ethanol that's eating them up?

So I finally took the plunge and switched over to the GM HEI module. I have to say, why didn't I do this earlier? I got the little aluminum adapter plate from Mopar HEI Conversion and an AC Delco D1906 module and a HEI e-core external coil and hooked it all up yesterday in about an hour after...

Is it normal for a variable speed/3 speed wiper motor switch to get quite warm after running for awhile? After, oh say 30 minutes of running, the turn knob of the switch gets pretty warm in my 68 Barracuda. Didn't know if that was normal, or if maybe I had some resistance issues at the...

So has anyone ever had an ignition switch go bad and fry the fusible link and melt some wiring?

So I finally got fed up with the squareback alternator and decided to see if I could get a newer style alternator put in. So I picked up a 120 amp alt for a 93 Dakota and with a little bracket fabbing, was able to get this installed. I also had to do some surgery on the output stud, as it was...

So I've noticed lately that my ignition key is warm/hot to the touch after taking it out of the ignition switch. Is that normal, or is there maybe some carbon buildup etc. inside that's making the normal current that flows through it heat up the lock cylinder? I'm wondering if I need a new...

So from what I can remember, I have an old MP distributor from the electronic ignition conversion kit, from the late 90's. So I was checking the vacuum advance and it does not hold vacuum, it bleeds off, so I decided I should replace it. But I'm not sure what part number to look for. The...

Does anyone have any wisdom about putting an intermittent delay on the wipermotor? I have the variable speed switch and motor.

So my 68 cuda had the 3 speed variable switch and motor, but I'm not getting all of the speeds. Low seems to work and then where you would expect a click to medium and fast just isn't there. The variable does work. I know these switches are rarer than hen's teeth so I was wondering if anyone...

I've searched for about 45 minutes and can't find it. I know there is a detailed instruction page out there that shows how to build one. I thought you could buy one already made as well. I have a 68 cuda btw. Thanks.