Search results for query: *

Right now I have the tall chrome Moroso valve covers. I changed to the Trick Flow heads with Harland Sharp rockers. I am now having some interference problems. I have bent the baffles and the rocker studs still touch. My question is what is everyone using for tall valve covers? There seems to be...

A friend is looking for a good create 408 engine. Since Mike is gone to other pastures, I am at a lost to where to go and want to take a survey as to what is avaibile in the market place. I think he is looking for a 408 in the 500 to 550 horsepower range, and most likely put a EFI on it. Thanks...

My excitement has been crushed. Got a set of the new Trick Flow heads for the LA. Used the Harland Sharp rocker arms and new ARP bolts for the stands. Measured the push rods and got new Smith Bros. to that length. Installed all the new parts and torqued to spec and adjusted the lash to the...

Anyone know what Mike at MRL,was using for his solid roller lifters for the small block LA? He has a part number of #2018-16. I did a search and really found nothing for that number.

Thanks to Mike at B3 Racing Engines. He got me a set of new SBM 190 heads. These heads are for a solid roller lifter cam. They require a stud kit. Now I will have to install them, most likely in June, after our Mopar show in May. I have collected the items to do the exchange. My stepson get the...

Really not looking for any specs, just cam brand names that is being used. We are building a 408 from a 360, aluminum heads, RPM manifold with EFI. I have used many different brands of cams in the past, I am using a Lunati mechanical roller in my Dart now.

I am considering a head change on my 408. It now has a 10 to 1 compression ratio with aluminum heads. My question is if I change to the new compression ratio which would be 10.3 to 1. What effect does this make on drivability? I know the change is small and there maybe not any real effect. The...

I have a 69 Dart with a 360, running a Eddy RPM manifold and a 750 Holley. The air cleaner I used as a dropped base 14" K & N 3" cleaner. There as good hood clearance with this combination. Now I am in the process of installing a Fast 2.0 fuel injection unit. This has changed the position of...

A general question to all that are running a 408 with about 550 hp. What radiators are you using? I am looking at a 22" Wizard radiator, just curious has anyone used these or running a 26" instead.

This is not to bash everyone but more for information. I am looking at an Indy Heads 415 create engine. What is everyone using for their engines? Is your experience with your create engine good or bad and which one re you using. The search of the internet only leaves you with more...