Search results for query: *

I need to know which rods are better for a stroker motor . I will be using a 440 source kit and wanted to know if H or I beams would be best suited for a street strip car .](*,) I am using a hyd roller cam with .610 lift 285 duration it will require a 3800-4000 stall Will use Stealth heads...

I am building a stroker motor and was wanting to know if a girdle was going to be needed . its going to have 610 lift roller cam 235 deg duration at 50 sprayed with 150 nos

I am in the process of building a 512 stroker and was going roller cam but heard that thier was problems with solid roller lifters . This is going to be a street strip car max effort but dont want to have problem every time I drive it to the cruise in or around town. Any help would be...

I am in the process of either building a new engine or buying a creat motor. I spoke with CM engines today and asked about puttting a roller in one of thier motors and was told not to that the cam would wear out in about 10,000 miles or less . was wanting to know if that is true. I know that...

Well the 440 in my duster blew ( block still good I hope ) up need some ideas 1. do I buy a 500 wedge from mopar 2. buy all the componest from hughes 3. order a complete coustom looking for above 500 hp. If I go with option 2 will Eldbrock performer heads work with the herb McLandles...

The 440 in my duster backfires through the left side exhust of the motor only. This didnt start occuring till I changed the cam to a MP 509 lift. The car has 906 heads Herb Mclandles headers eldbrock torqer II intake 850 holley double pumper 6 pack pistons decked block . The cam is installed 4...