Search results for query: *

I am selling a radiator and steel shroud as removed from a 1963 Plymouth Valiant with a slant 6. It measures 18" across and the number on the tank is:2445620. The steel shroud is in good shape and I tried to find out about it but to no avail, but it was made to fit the rad. Overall everything is...

I am selling a 340 block date casted 9-26-72 that was stated as from a Cuda. It was cleaned, bored +.030, and new freeze plugs and cam bearings installed then left to sit (not by me). It now has surface rust that should be easily cleaned up. I'm asking $600 and its located in Michigan. PM me...

I have 2 22" fan shrouds for sale both with part numbers of 2785614 that fit 68-69 A bodies with 273,318, 340, & 383 engines. The one on the right has some orange over spray in a couple places and a small scuff area on the top right. The one on the left is a little cleaner and has a very small...

I have for sale a 1970 340 AVS carb that would be correct for a Dart, Valiant, Challenger or Barracuda. I was told is was off a Challenger. The number is: 4934S and still has the original carb tag. It is in good shape and was on a 360 in a daily driver that was parked 3 years ago. Everything...

I have for sale a used LD 340 manifold that was removed from a 360 motor. It was in a dodge van that was a daily driver up until 3 years ago. Its in good over all shape but has 1 broken bolt in the coil mount, and the inside carb bolt holes a couple have been heli coiled. It needs to be cleaned...

I have a 1995 date cast 318 Magnum block with caps. I'm not sure what the status is with this block but it looks like it was hot tanked and prepped for assembly with new freeze plugs and cam bearings. The bore size is 3.915 which I believe is stock for a 318, so maybe this was a virgin block...

I have a 4 speed frame bracket removed from a 67 Dart and a trans cross member from the same car. Both are in good shape and will need cleaned for use. The frame bracket still has a small piece of frame attatched that will need to be removed. $15 each plus shipping from Pinckney, Michigan. PM me...

I have a nice used set of Superstock 3400# leaf springs for sale. They are the weight for E-bodies but will bolt right into any A-body. $150 plus any shipping from Pinckney, Michigan. They can be picked up in person as well. No paypal so money orders preferred. PM me here. Thanks. Greg

I have for sale a small block timing cover with a 70 date code, blasted and ready for use.$50 plus shipping. Also a manual steering gear box removed from a 66 Plymouth and has a 66 date code on it. The gear box is cleaned for the most part and is in good condition. $75 plus shipping. Both items...

I have a 1 piece 5/16 tank to front fuel line that I took off my 69 Dart to go with a bigger 3/8 line. Its in great shape as I bought it new years ago and installed it on my car. $20 pickup here at my house in Pinckney, Michigan. Of course if you want it shipped it will have to be bent in half...

For sale is a 727 small block starter shield with the inspection plate and 3 screws. Its in good condition but needs cleaned up. Located in Michigan and $25 plus shipping. PM me here. Thanks. Greg

I have a new with cap distributor for the /6 motor. I had it for my car but no longer need it. Its located in Michigan and I am asking $75 plus shipping. PM me here. Thanks. Greg

I have for sale 1 small block 727 transmission(right in pic) #3515843 out of a lower milage 72 duster 340 car. I dont know the overall condition but I would expect to rebuild it. Included is the convertor, flex plate, both trans to block mount brackets, neutral safety switch wiring and the...

I have a 1972 340 standard bore block with caps. The bore size is 4.03, it was cast on 2-10-72 and under the left head it reads;LM340L H2. $500 and it is located in Michigan. PM me here. Thanks. Greg

I have a set of TTI headers I picked up for a spare set that I probably wont use. They were on a 70 Dart with a 340. They are not the step style and I dont know the year they were made. They are in great usable shape but have a couple dented tubes, Im guessing for clearance and one collector...

I have a 72 340 manual thermoquad for sale. The number is 6138. I bought this carb off the shelf at a buddies auto parts store back in the 80's. It was a rebuilt unit and still has the rebuild sticker on it. I used it on a few different cars and it worked great. The last time I put it on a...

For sale is an A body 8 3/4 rearend with axles, backing plates, drums and brake hardware. The axles and drums have been redrilled for big bolt pattern but can be used as small bolt if needed. Overall it is in good usable shape or can be redone for show. I do have a set of small bolt axles I can...

For sale is a set of Kelsey Hayes brakes removed from a 67 Dart. The bolt pattern has been drilled for big bolt but it looks like a switch back to small bolt will take little effort. The rotors are rusty and might have enough meat left to turn. The backing plates are nice with a couple small...

For sale is a manual steering gearbox that was removed from a 67 Dart. It works fine but needs to be cleaned up. The pitman arm is no good and can be removed for shipping. $50 plus shipping from Pinckney, Mi. I accept money orders and if me not having paypal is a deal breaker, I can use my brothers.

I have for sale a 1970 slant six motor and trans that was removed from a 70 Duster many years ago. I have no info on either piece as I got the car with a friend as a rolling shell from a guy who stripped it for his race car. I do know that it is not locked up and from remembering the car it was...

I have a front sway bar as removed years ago from a 74 Dart 4 door car. Im not sure if it is an aftermarket but it looked like it was on the car from day one. It had L shaped brackets mounted to the lower control arms, those have been misplaced. $25 plus shipping from Michigan. If no interest in...

I have a set of shock mounting plates for the 8 3/4 rear ends. They need blasted and the shock studs need replaced as they are rusty. $25 plus shipping from Michigan. Greg

For sale is a set of small block pulleys removed from a 72 Duster 340 car. They are for manual steering and fit forged cranks. They were blasted and painted and can be used as is or detailed for a better look. $60 plus shipping from Pinckney, Mi.

For sale is a set of 5116 hooker super comp headers. I believe these are the smaller tube design and #1 is a slip tube. They are solid structurally but as you can see have the typical clearance flat spots on a couple tubes, otherwise very usable. The rust is mostly surface and should come off...

I have for sale a dated 69 timing cover for small block motors. The part number is:2946797. It is the early version with the timing tab on the passenger side, its in good shape. $50 plus shipping from Pinckney, Mich. Thanks. Greg

I have a set of Hooker Super Comp 5116 headers that fit small block 67-76 A bodies. They have been run on a car for a while but are still in solid shape. They do have some clearance dents IE:road rash:violent1: as evident in the photos, The drivers side has the #1 pipe as a slip tube. Overall...

I have a set of Mopar Super Stock springs that I believe have not been installed. They are part #'s 3690460 & 3690461 for 3600# cars. One still has a partial sticker on it and the date is hard to read but it looks like they were bought in 89?? The front bushings have dry rot evident on the...

I have for sale a set of X heads that have 7 19 & 7 23 69 dates casted on them. They look to have been used not long before I aquired them from a friends estate. The only machining I can see is in the oil return passages and they are smoothed for improved flow. Everything looks good and usable...

Im selling a 1970 340 that is all apart and ready for a rebuild. The block was casted on 3-4-70 and has FW340-32060134 on the front pad and OB341963 VIN. It is still the stock bore and comes with all main caps and windage tray. It includes a stock crank,rods and pistons from a standard bore 71...

Hello all, I have a small block bellhousing for sale with the part number 2892482 that fits 69-71 237-318-340-360. Its in good shape with all holes looking good. It has the Z bar ball bracket also. The bearing hole measures 4 5/16. $100 plus shipping from 48169 in Michigan. Greg