phildart
dartparts12
Where does the red power wire from the 67 convert top switch locate to?
Oops, misspoke above! Red with white tracer to the amp post! Plain red and yellow to the harness connection in the kick panel that goes back to the pump motor!
I just used the relays from a LeBaron that we parted out along with the wiring
I really like the idea of relays in the convertible top motor, but not be an electrician, i'm confused. The first diagram shows the existing wiring out of my 66 dart. The second one shows what I think is proper placement of the relays. My question is, on WJAJR's diagram it shows the existing feed going ????Just an idea:
I installed relays to relive the 30 amp load from the top motor dash switch in 2008. Those switches are hard to find, appear to be under sized, and are getting old. Now the dash switch handles very low amperage as a trigger for two relays that do the heavy work.
I utilized most of the existing conductors as they were in good condition. Here is how it is wired:
I really like the idea of relays in the convertible top motor, but not be an electrician, i'm confused. The first diagram shows the existing wiring out of my 66 dart. The second one shows what I think is proper placement of the relays. My question is, on WJAJR's diagram it shows the existing feed going ????
Everyday takes me closer.
Thanks
So, I add a secondary power feed to the switch? There is only one feed now, red with tracer. It comes off the post, into the circuit breaker, routes back up to the switch. But if that now feeds the relays, I need a low amp secondary feed to the switch? From the accessory position on the fuse block??? Wjajr, where did you mount the relays? Under the dash? Sorry for my ignorance but I really want to get this right!
So, I add a secondary power feed to the switch? There is only one feed now, red with tracer. It comes off the post, into the circuit breaker, routes back up to the switch. But if that now feeds the relays, I need a low amp secondary feed to the switch? From the accessory position on the fuse block??? Wjajr, where did you mount the relays? Under the dash? Sorry for my ignorance but I really want to get this right!