68 CUDA FORMULA S
Well-Known Member
When I bought this 68 barracuda a lot of parts were already off or just half ***-ed on. I went to put the wiper motor back on the other day and I was missing one grommet, I had a damaged grommet and I was missing one of the metal spacers. Well the go to member when you need parts for a 67/69 barracuda is Eddie (barracudakid) and he had the parts that I needed. Problem is that one of the spacers that he sent me was smaller than the other two, he looked at four other cars and all four of them had this spacer on them. It is shorter than the other ones and it has a lip on it and it was located on the upper right stud. I looked in the service manual and there is no mention of the shorter spacer. Is there any one who is familiar with this shorter spacer and knows what it is for or why it is on there? My barracuda has the two speed wiper motor on it, don't know if that makes a difference or not. Here is a picture of the taller spacer on top and the shorter spacer on the bottom.