thesiren74
Well-Known Member
My buddy will sell his 3,500-4,200 torque converter but after looking at it it has 10" bolt circle with 5/16" bolt holes wtf? Who would make a high stall converter like that with 5/16" bolts?
That's what I'm doing, it's a $691 converter he said I can have it for $450 but I think I'll go through Cope get a custom converter.Say NO!!! to that converter. Boss Hogg has a terrible rep.
Lol yepAll the Chevy guys think they're gold. That oughtta tell you all you need to know.
Problem is I have a sfi flexplate with the 7/16" holes and don't really want to buy a new flexplate when I can roll the money into a nice converter.I had one decades ago, as my first 'loose' convertor, I didn't have any complaints....5/16 grade 8 are plenty strong.
ACTUALLY QUITE A FEW -------My buddy will sell his 3,500-4,200 torque converter but after looking at it it has 10" bolt circle with 5/16" bolt holes wtf? Who would make a high stall converter like that with 5/16" bolts?
I've never seen one. Usually stock or low stall has them.ACTUALLY QUITE A FEW -------
ACC makes the Boss Hog, they are across the street from PTC in Alabama.I recall Alabama Torque Convertor made my Boss Hogg. Same guys?
I just bought an Boss hog 3200 - 3500 nitrous converter from them about $700 they must have upgraded the bolts this one has 7/16 " & anti ballon plateMy buddy will sell his 3,500-4,200 torque converter but after looking at it it has 10" bolt circle with 5/16" bolt holes wtf? Who would make a high stall converter like that with 5/16" bolts?
You can get both, this one was in my buddies car for like a day before he decided it was too much for his show car cruiser 69 barracuda.I just bought an Boss hog 3200 - 3500 nitrous converter from them about $700 they must have upgraded the bolts this one has 7/16 " & anti ballon plate
Meh I've takin chances on stealth heads and have nothing but great things to say, if it does go south I can rebuild my own transmissions and everything else in the driveline.No offense meant , but you were warned......