RAYS 69 MOPAR Well-Known Member Joined Dec 8, 2007 Messages 247 Reaction score 37 Location los angels Feb 20, 2008 #1 Hi I Just Put In A Erson Cam In My Small Block I Would Like To Know Do I Have To Change The Dist. Gear???its A Flat Tappet Hyd Cam
Hi I Just Put In A Erson Cam In My Small Block I Would Like To Know Do I Have To Change The Dist. Gear???its A Flat Tappet Hyd Cam
340demon old man Joined Apr 9, 2006 Messages 240 Reaction score 45 Location Ocean Shores, Wa Feb 20, 2008 #2 do i have to NO but is good idea to change most grinders will not garranty the cam if you do not change to dist gear
do i have to NO but is good idea to change most grinders will not garranty the cam if you do not change to dist gear
RAYS 69 MOPAR Well-Known Member Joined Dec 8, 2007 Messages 247 Reaction score 37 Location los angels Feb 20, 2008 #3 What Is A Good Gear To Bye??
Johnny Dart Well-Known Member Joined Nov 30, 2006 Messages 8,749 Reaction score 4,014 Location So Cal Feb 20, 2008 #4 Unless your dist is old and worn out you are fine. Plug that bad boy in and go. In fact if you dont have electronic ignition,now would be a good time for the Mopar Performance kit.
Unless your dist is old and worn out you are fine. Plug that bad boy in and go. In fact if you dont have electronic ignition,now would be a good time for the Mopar Performance kit.
rumblefish360 I have escaped the EVIL Empire State! FABO Gold Member Joined Jun 21, 2005 Messages 49,625 Reaction score 23,521 Location Florida Feb 21, 2008 #5 I never heard of a need to change a gear for warranty. I never did. Never a problem.
dustertogo Well-Known Member Joined Mar 7, 2006 Messages 859 Reaction score 193 Location Brandon, MS Feb 24, 2008 #6 You may be referring about the need to replace the steel distributor drive gear with an aluminum/bronze gear when installing a roller cam.
You may be referring about the need to replace the steel distributor drive gear with an aluminum/bronze gear when installing a roller cam.