cheap V8 torsion bars

[johnparts]

Hey Guys running on a new baby budget I need a set of V8 torsion bars for my scamp. I have some parts to offer in trade Edelbrock 318/360 Performer Intake and I can also do side work for Local guys.

 

[rumblefish360]

Where are you located?

 

[crackedback]

I have a pair of 340 torsion bars $80 + shipping

 

[johnparts]

Oh give me a few hours and I'll let you know

 

[johnparts]

Where are you located?

Illinois

 

[68 Rat Rod]

I don't know if these will work or not. What I have is a pair out of my 68 Dart with a 273 engine. If they will work and you are interested, $50.00 plus ups charges. Email me and let me know. [email protected]

 

[PartNDarts]

Sent you a PM.

 

[johnparts]

Sent you a PM.

pm replied

 

[DCordoba]

p.s. I am from New brunswick Canada and I have a 73 340 4spd DT sport in resto, with a 73 slant 6 car for parts ......... the t bars are the same ..... same numbers left and right for both cars

 

[crackedback]

p.s. I am from New brunswick Canada and I have a 73 340 4spd DT sport in resto, with a 73 slant 6 car for parts ......... the t bars are the same ..... same numbers left and right for both cars

Somehow the /6 car ended up with 340 bars because even the /6 AC cars aren't supposed to get the larger bars.

340's should have 892/893 bars

 

['64 Cuda]

Somehow the /6 car ended up with 340 bars because even the /6 AC cars aren't supposed to get the larger bars.

340's should have 892/893 bars

Or the 340 car ended up with slant six bars.......

 

[mopardude318]

have you found some torsion bars? i have a set that came out of my v8 68 cuda...$50

 

[Bickel Motors]

have some available in Iowa. Call me at 515-480-3891

 

[Baxter61]

I have some 340 torsion bars, at this point $50 plus shipping Email [email protected]