Closed chamber SB heads

[Jonnylightening]

Hey guys im lookin for a good used set of closed chamber SB heads. Mainly lookin for iron heads not aluminum. Please let me know what ya have. Thanks Jon

 

[TrailBeast]

Just a suggestion, but maybe look into a set of EQ heads from Magnummopar.com or someplace similar.
By the time you buy a set of used heads and do what they might need done you could get a set ready to go on.
The EQ's flow about 230 cfm right out of the box, have 1.92 intake valves 62cc closed chambers, and 172cc runners and a 3 angle valve job.
They also have stages of upgrades like porting.

Just a suggestion.

 

[mikebee]

I have a set off a 65 273 with the 5/16 intake bolt holes also have the 2 barrell intake to match.

 

[66fs]

I have 302s and 66 - 67 273 heads. Even a set of good Magnum heads. What are you looking to do with them?

 

[Treblig]

I have the original closed chamber 69cc heads off my '69 Barracuda. They had been reworked before I bought the car and the car ran very well. I only drove the car for a year (10K miles) before I swapped over to 302 castings because I was changing my exhaust manifolds. Unfortunately I'm in S. Texas.

treblig

 

[rumblefish360]

318 or 360?

 

[Jonnylightening]

318

 

[Jonnylightening]

Im kinda debatin on the EQ heads. For $600 a set thatll outflow stock magnums is seemin like a good buy

 

[Sedanman]

I have some closed chamber 273 heads for 66-7 but shipping may kill it.

 

[66fs]

Im kinda debatin on the EQ heads. For $600 a set thatll outflow stock magnums is seemin like a good buy

It is but you also have to look at the extra expense to use them.