have a 67 dart parts car.am getting ready to remove the complete driver quarter from the roof seam out with the left side of trunk gutter to replace one on a 69 gts.where will I be findin welds other than inside drivers door and fender lip
wait, you're gonna take that quarter there and put it on another car?! or is that the car that is gonna receive the replacement?have a 67 dart parts car.am getting ready to remove the complete driver quarter from the roof seam out with the left side of trunk gutter to replace one on a 69 gts.where will I be findin welds other than inside drivers door and fender lip
View attachment 1715106851
67 quarters are a great choice. No markers. Much cleaner.
View attachment 1715106858
View attachment 1715106860
off of this one a 67 onto the crusty 69 which is a gts 340 4 speed will also use some parts on the sublime 340 swingerwait, you're gonna take that quarter there and put it on another car?! or is that the car that is gonna receive the replacement?
any reason I cant cut below this seam crimp the metal and weld it backRoof B-Pillar about 6" up from the top of the quarter, there will be lots of lead and a good seam with lots of spot welds.
What's wrong with the quarter you are replacing? Do you need a complete quarter?have a 67 dart parts car.am getting ready to remove the complete driver quarter from the roof seam out with the left side of trunk gutter to replace one on a 69 gts.where will I be findin welds other than inside drivers door and fender lip
View attachment 1715106851
What's wrong with the quarter you are replacing? Do you need a complete quarter?[/ lower part to driver door and wheel well shot rust thru in trunk gutter and corner of window when I make first cut will stay about 2 inches back from door and top ridge and maybe do a partia.l fenders hood trunk were shot and drivers quarter rest of car grat shape