partsman1965
Well-Known Member
I have 74 Dart sport with column shift and looking for Tach mounting ideas. I have a large 5 inch tach im going to use! Show me your Tachs!
I used the screw holding the plastic cover on the pillar to mount mine.I have 74 Dart sport with column shift and looking for Tach mounting ideas. I have a large 5 inch tach im going to use! Show me your Tachs!
believe the launch, but not w/ those tires !! LOL-------- I put mine in the original tach hole in the dash, you can put a shift light almost anywhere out of the way .I have an Autometer Sport Comp that I mounted on a super strong magnet and just brought the wires up through the defroster vent. I put a 4-pin plug on it so I can remove it easily enough if I need to. The tach itself just mounts to the bracket that came with it. I don't have a good up close picture, but you can see it fairly well in the pictures attached. It works great because I can move it left, right, or center. I put a thin later of plastic-dip on the magnet so it doesn't scratch the dash if I move it. I don't move it often as the magnet is ridiculously strong and it's tough to get good leverage on it. I've picked up the front tire 10" or so on launch and it has never moved.
View attachment 1715011879
View attachment 1715011881
View attachment 1715011882
Nope, those are my street shoes. I run 29 x 9 slicks at the track. Although the highest I ever got the front end was while running some crazy old JC Penny's 28 x 7 cheater slicks. I had to boil the crap out of them to get them to grip but boy did they bite hard.believe the launch, but not w/ those tires !! LOL-------- I put mine in the original tach hole in the dash, you can put a shift light almost anywhere out of the way .