[FOR SALE] W2 TTI Headers and T&D 1.6 Rockers

[FredS]

Doing some changes on my Stroker, and have some parts for sale.

T&D W2 Aluminum 1.6 rockers. These are at T&D right now and have been inspected and out of tolerance parts being replaced, so the set of rockers will have been certified by T&D as ready to go. Should be ready very soon. This is just for the rockers, not the stands. T&D sells the stands separately too. Using the stands on the steel ones I'm switching to.

$650


TTI ceramic coated Step headers. Only selling to upgrade to the 1-7/8 Race headers. headers are clean, with some marks on them, but no dents to make them fit type issues. These are at IMM in CA at the moment, but I can get them at any time.

$450

 

[RAYS 69 MOPAR]

Pm sent

 

[FredS]

TTI headers sold. T&D Rockers are in from inspection and ready to go.

 

[rumblefish360]

Which model rockers?
8002 W-2 W-5 Race w/5.350" valves
8005 W-2 W-5 Race w/5.140" valves

 

[FredS]

Rob, good question. I had to go check them.

they appear to be a mix of 8002/8005s as the pivot to roller tip centerline comes up as 1.450 on some, and 1.520 on others. Basically, the exhaust rockers are 1.520, the offset intakes are 1.450.

 

[FredS]

someone make an offer on these rockers.