Weird Manifold

-

Landons65Dart

Proud Mopar Owner
Joined
Jun 16, 2013
Messages
109
Reaction score
3
Location
Bakersfield, CA
I found this weird small block EFI intake at the Hot Rod Reunion at Famoso raceway for $30. I could tell it was small block, and the guy said it was 80's, but I can't find anything on it. I bought it for my 318 build, mainly because it's weird and oddball, and thought it would be perfect since I want to do twin turbos. Anyone know what it is, what years it ran?

Here's the picture:
http://www.forabodiesonly.com/mopar/vbpgimage.php?do=full&p=31007&d=1382286072
 
Looks like the EFI intake from the magnum engines from 92, and up. They are called "Turtles". Might be wrong, but that's what it looks like to me, after working on a few of them.

barracudadave67
 
Yessir. Thats a kegger manifold for a magnum motor.... To use it in your build you'd have to use magnum heads 94ish on up.
 
Nothin weird, special or rare about it. They made millions of them. Their RPM range sucks balls, too.
 
I had 2 twins to it. One off 97 and one off 99 360 magnums. Couldn't give them away so I pulled all the steel and cashed them in
 
I found this weird small block EFI intake at the Hot Rod Reunion at Famoso raceway for $30. I could tell it was small block, and the guy said it was 80's, but I can't find anything on it. I bought it for my 318 build, mainly because it's weird and oddball, and thought it would be perfect since I want to do twin turbos. Anyone know what it is, what years it ran? Here's the picture: http://www.forabodiesonly.com/mopar/vbpgimage.php?do=full&p=31007&d=1382286072
Stock dodge ram/Dakota magnum "keg" manifold. You have the injectors already, so you can sell those for $10 each and make your money back...eventually
 
Pick up a single plane for a boosted application. A TorkerII 340 would well and on the cheap.
 
-
Back
Top