'69 440 block +.040
ProGram 4-boly (boly? bolt!) mains--------------------------------------------------STUD GIRDE
Melling HV pump---------------------------------------------------------------------=SAME
4.15 Eagle Crank---------------------------------------------------------------------4.250 SCAT
6.76 Eagle Rods-----------------------------------------------------------------------7.1 EAGLE AP 2000 BOLTS
Diamond dished 10.3ompresson-----------------------------------------------------SAME COMP.
Lunati 60333 solid roller--------------------------------------------------------------COMPCAMS 292 EXTREME SOLID ROLLER
PRW 1.5 stainless rockers and hughs rocker shaft hold downs---------------------HUGHS 1/6 ROLLER ROCKERS AND SHAFTS
RPM heads 292 cfm @ .500", 309 @ .600", 321 @ .700"---------------------------VICTOR KNOCK OFFS
[email protected]
Edelbrock Torker II--------------------------------------------------------------------SAME , OPENED UP CORNER RUNNERS
950 cfm Quick Fuel -------------------------------------------------------------------FAST 2.0-1200 CFM THROTTLE BODY--Q950 back to back to back to back tests...............
Torker II.......................................................620 TQ/638 HP------------------ALL UNKNOWN
Torker II & 2" Spacer....................................634 TQ/650 HP
Edelbrock RPM.............................................640 TQ/627 HP
Ported RPM.................................................639 TQ/640 HP
Edelbrock Victor w/gasket match.................615 TQ/637 HP
Victor w/plenum blend.................................620 TQ/647 HP
Victor w/plenum blend & 2" spacer...............624 TQ/654 HP
Victor w/ported plenum...............................617 TQ/647 HP
Victor w/ported plenum & 2" spacer.............629 TQ/656 HP
Oh yeah, peak horsepower..........all at 5,700-5,900 rpm.
Of course these are only peak to peak results. The real story is how they performed throughout the rpm range.