-
000003 - Parts needed to assemble and ship.jpg -
000004 - Primary parts to assemble.jpg -
000005 - Primary parts to assemble.jpg -
00006 - Shrink tube kit.jpg -
000001 - Solder station and tools.jpg -
000002 _ Mag light with positionable alligator clips.jpg -
0000 - Messy workstation.jpg -
001- Cut wire to length.jpg -
002 - Strip and twist wires.jpg -
003 -Orient wies to cap.jpg -
004 - Join wires to cap leads.jpg -
005 - Tin leads and 5V wire.jpg -
006A - Trim leads.jpg -
006B - Trim leads.jpg -
008 - Position cap leads.jpg -
007 - Spead legs and tin.jpg -
008 - Position cap leads.jpg -
009 - Slide on shrink tube.jpg -
010 - Close legs and shrink.jpg -
011 - Position over-tube and shrink.jpg -
012 - Completed assembly WO heatsink.jpg -
013 - Orient parts for attachement to HS.jpg -
014 - Attach to HS.jpg -
015 - Completed assembly.jpg -
016 - Trim strip and twist lead ends.jpg -
017 - Bench test completed assembly.jpg -
018 - Gather and pack.jpg -
0019 - Ready to pack and ship.jpg
How to build your own Solid-State Instrument Voltage Regulator (IVR) for yourself (or build them in bulk and send to your friends)
- Author 67fish383S
- Publish date
- Updated
- Article read time 7 min read
A brief how-to on building your own Solid-State IVR for fun and friends