Thinking about going to little more of a stock look with my 67 Dart. I want to get a set of factory rally wheels in a 15" x 7" for the rear but not sure what to run on the front. I have converted the car over to 4 1/2" bolt pattern front and rear. The front has the '73+ disc brakes. Would I be able to run a 15" x 7" on the front with the stock 4 1/4" backspace? That is the narrowest 15" rally I have seen.
what size rally wheel on the front???????
- Thread starter duster360
- Start date
-
holmes
Well-Known Member
This is what I'm running.
http://www.jegs.com/i/Wheel-Vintiques/939/56-561204/10002/-1?parentProductId=748983
http://www.jegs.com/i/Wheel-Vintiques/939/56-561204/10002/-1?parentProductId=748983
I didn't know they even made that 6" wheel. That is exactly what I needed. I am running a 15" x 6" weld draglite on the front at the moment with a 3 1/2" backspace. I was under the impression that to get a 6" wide wheel I would have to run a 14" rim or a custom one. Problem solved. Thanks.
holmes
Well-Known Member
I had 7" wides and 215-70s and they rubbed a little bit, so I went to the 6" wides and 215-65s for clearance.
v8fish
Well-Known Member
I have 15 x 7 on rear and 14 x 6 on front of my 72 Dart looks good no issues with size. All big bolt pattern.
That's even better news. I am running 215-65 cooper cobras on front. It's a little tight with the 3 1/2" backspace but does work. I think that extra 1/2" of backspace will be perfect. Thanks.
-
