What's Your Stand On Stance?!

-
That black car has the perfect stance. Actually, that car is simply perfect.
 
I like them stock or just a hair higher in back. I don't like a lot of additional rake at all.
 
What I prefer on an early Abody
485BC482-2A51-47C4-A991-F2661000B4E9_zpsmgml0bqr.jpg

F088C985-D194-423A-9C70-8730F48115A5_zpszsoegpcy.jpg
 
This is the stance I want on my Duster, same style tires and wheels too. BTW this thing is as close to my dream Mopar as it gets.

SEMA-2016-Fishtail-Cuda-01.jpg

maxresdefault.jpg
 
Needs just a little rake to it..but that is a bad *** car. If I didn't have a beer budget that's what I would own.

Lol it would look sweet with a bit of rake but this car was built for drifting and road racing hence the lowered level stance. My Duster has a decent bit of rake to it but I want to get the rear back down level with the front because it feels like sh** in hard cornering.

13592288_10207799686962368_2641231547985594925_n.jpg
 
Lol it would look sweet with a bit of rake but this car was built for drifting and road racing hence the lowered level stance. My Duster has a decent bit of rake to it but I want to get the rear back down level with the front because it feels like sh** in hard cornering.

View attachment 1715044295
You're close to my old home town..Greeley..Like your Duster...Agree Dusters look better level.
 
I like mine slammed in the front, up a little in the rear. But damn, the black one on page one is nice
 
Congrats to everyone who posted a pic. Members here have beautiful cars, I was oohing and aahing while scrolling through every page.
 
I don't know how long you have had them but they can settle a bit over a few months.
I asked for stock springs from Laura at "Springs and Things" but i think they sent the 1 inch over pieces.Anyway it sits a bit high.I have made new front perches to lower it to the correct height.
...your car is gorgeous and sits Perfect!
 
I don't know how long you have had them but they can settle a bit over a few months.

"Espo" are pretty good at holding their arch.It's been a year and they hadn't changed.I installed my replacement perches today.
Basically took some 3 1/2" square tubing with 3/16" wall and cut away everything that wasn't a spring perch...then drill the main hole higher so the car sits lower.It's 22" to my wheel well now and stock was 21 1/2"...close enough.
 
Here's mine at the 1st "cruise-in" of 2017. My buddy and I were the only 2 cars that showed up (cloudy and chilly with very threatening looking clouds).

I put new tires on it last week (195/75R14 up front, 215/75R14 rear (on 14" X 5 1/2" Rallyes front and rear)). Unfortunately, I lost the left front beauty ring on the way to the "cruise-in" (darn pothole roads in Michigan).

IMG_0514-Cropped.JPG


IMG_0516-Cropped.JPG
 
-
Back
Top