Have a 72 Scamp with sbp 5x4 wheels that are 14x6. Turns out all four are bent and I just bought tires for them (how convenient!). Considering going the 15 inch route if the shop is kind enough to exchange the tires but there doesn't seem to be anything other than Cragars and Rallyes. I have rallyes on there now powder coated black and like the look. But am curious to see if anyone else has found any wheels other than what's found on summit. Or do you all think the 14s should just be replaced with another set of same size? Don't want to change bolt pattern at this point in life. Thanks!
Small bolt pattern wheel options?
- Thread starter jrc4y4
- Start date
-
You can run a few sizes and not throw off the sbp but that depends on how big your wallet is for one offs or use wheel adapters. Wheel adapters will start arguments as some people think they are great while others say they are bad. 5x100 metrics won't work but then again some ppl say they fit. Won't fit my 65 Valiant and it's the sbp. All in what your taste is. Old school, resto mod or modern. Been looking for a set of sbp 14s myself so have fun looking. They are few and far between.
383Duster
Well-Known Member
Coy wheels has 5x4 bolt pattern available
I have some on my car, 17 inch. I think they offer some 15 inch wheels.
I have some on my car, 17 inch. I think they offer some 15 inch wheels.
Shane65
Well-Known Member
Whatever you do, don't order from coys..
Would you happen to have a better photo of your car besides your profile pic? Would like to see it.looks nice
69_340_GTS
Well-Known Member
Whatever you do, don't use wheel adapters.
Here is a source for 5x4" wheels. ET Mags. You'll have to call Scott and discuss which styles, sizes, and backspacing he can make. He is great to deal with and the wheels are just works of art. ET Wheels by Team III Wheels
Here is a link to a pic of my car with the 5x4" 15"x7" E-T wheels on it: 1969_Dodge_Dart - Google Drive
Here is a source for 5x4" wheels. ET Mags. You'll have to call Scott and discuss which styles, sizes, and backspacing he can make. He is great to deal with and the wheels are just works of art. ET Wheels by Team III Wheels
Here is a link to a pic of my car with the 5x4" 15"x7" E-T wheels on it: 1969_Dodge_Dart - Google Drive
Last edited:
383Duster
Well-Known Member
I had no issues with my order from Coy other than it took about a week longer than I was initially told. I bought my tires from him also, they came mounted and balanced... I have attached another picture, don't know how big it will display until I post this reply....
![10896962_857992337580681_5916287258300367603_n[1] (2).jpg](https://www.forabodiesonly.com/mopar/attachments/10896962_857992337580681_5916287258300367603_n-1-2-jpg.1715060547/ "10896962_857992337580681_5916287258300367603_n[1] (2).jpg")
AJ/FormS
68 Formua-S fastback clone 367/A833/GVod/3.55s
- Joined
- Jan 19, 2014
- Messages
- 24,929
- Reaction score
- 12,278
There used to be shops that straightened bent wheels. We even have one about an hour from where I live. The same shop can cut your spider out and weld it into a straight rim, course you can kiss the paint-job goodbye,lol. And they can also put that spider into a wider rim and change the offset.
1969VADart
Well-Known Member
I bought a complete set of American Racing Torque Thrust II's in 15x7 with SBP from a guy on eBay called Ron's Rims. It was a very smooth transaction and I would buy from him again. I think he had other SBP options as well.
I appreciate it, but not looking for that style of wheel. Good luck though!
Those look pretty sharp.
Yeah I like those, just not ready to jump to a 17. But I like their 15 inch and 14 inch options
Yeah I imagine the price of 15 inch rallyes from Summit would be cheaper than getting them fixed though.
Yeah he has some. More than I'm wanting to spend at this point.
Shane65
Well-Known Member
Yeah I tried ordering their 5 spoke in 15" sbp, they told me it would take 3 weeks.. 4 months later and every excuse under the sun, they told me "sorry we can't make them for you"... Complete waste of time. Terrible communication and customer service.
Wow! How long ago was that?
Small bolt pattern????????????????????
AJ/FormS
68 Formua-S fastback clone 367/A833/GVod/3.55s
- Joined
- Jan 19, 2014
- Messages
- 24,929
- Reaction score
- 12,278
For you below the border probably. For me up here, tho, it was no contest to have the spiders moved.Also,my brand new Wheel Vintiques came in primer.
1969VADart
Well-Known Member
They are in fact Small Bolt Pattern. He had lots of wheel sizes. Now, I'm not saying he was cheap because he was not. But he had what I was looking for and that is what mattered.
diymirage
HP@idle > hondaHP@redline
you can still get brand new slots from US Mags (made in china, of course) in 15X5, 15X7 and 15X8
of course, then you have to deal with that annoying bright polish but at least you'll have classy looking wheels
of course, then you have to deal with that annoying bright polish but at least you'll have classy looking wheels
AJ/FormS
68 Formua-S fastback clone 367/A833/GVod/3.55s
- Joined
- Jan 19, 2014
- Messages
- 24,929
- Reaction score
- 12,278
I bead blasted my 70's style kidney-slots.Then ran emerycloth over them until I got "the look"
Last edited:
What's the width of those Centerlines?
moparman3211
Well-Known Member
if you have a jegs shop down there you can buy them for 100.00 a wheel or maybe order them online from them
-
