Last one to post in this thread wins!

-
Fred Scigliano said:
Morning Mark looks like a nice day so far. Not much going on today so time to put the lawn chairs on the porch and put the snow blower away.
Click to expand...
Morning Fred. It's still pissisting down here and may stop later today and maybe see some sunshine.
Going over to my buddies place to test his alternator in his 65 Goat but I think the battery is toast. Too old. Have a great day and hopefully the "T" will start so you can rip up the roads and raise a little hell.
Happy Easter buddy
 
Mark Wainwright said:
Morning Fred. It's still pissisting down here and may stop later today and maybe see some sunshine.
Going over to my buddies place to test his alternator in his 65 Goat but I think the battery is toast. Too old. Have a great day and hopefully the "T" will start so you can rip up the roads and raise a little hell.
Happy Easter buddy
Click to expand...
The old truck was running yesterday started right up.You have a great Easter also.
 
This song will be in your head for the rest of the day.
57311608_675404579585454_8344544491696291840_n.jpg
 
Biff said:
So do you have the whole set up ? I’ve been thinking for a long time about it , but you half to double the price for Canadian
Click to expand...
So true Biff , my uppers cost me $500.00 Canadian , where you can get them in the states for $299.99 .
 
To answer the QA1 set up on Cuda I bought most of the kit but did it individually so it is kind of a blend of Wilwood, Hotchkis, and QA1. I am super thrilled with the results. The Demon I went with HDK which is also offered in PST catalog. The owner of HDK is Hemi Denny from here on FABO. I simply cannot say enough about the quality and level of customer service I have received from HDK. You might look at them Fred as another option. Same offer you can crawl all over mine if you want to see one in the flesh. The quality of welding on the HDK rig was top notch. And it was a bit less dollars than QA1 I do not think you will be disappointed with either of them.
 
Sublime one said:
To answer the QA1 set up on Cuda I bought most of the kit but did it individually so it is kind of a blend of Wilwood, Hotchkis, and QA1. I am super thrilled with the results. The Demon I went with HDK which is also offered in PST catalog. The owner of HDK is Hemi Denny from here on FABO. I simply cannot say enough about the quality and level of customer service I have received from HDK. You might look at them Fred as another option. Same offer you can crawl all over mine if you want to see one in the flesh. The quality of welding on the HDK rig was top notch. And it was a bit less dollars than QA1 I do not think you will be disappointed with either of them.
Click to expand...
Morning SLO. I was wanting to stay with the torsion bars instead of coil overs so I didn't have to add the support bars on my car. I will check out HDK thanks.
 
Sublime one said:
To answer the QA1 set up on Cuda I bought most of the kit but did it individually so it is kind of a blend of Wilwood, Hotchkis, and QA1. I am super thrilled with the results. The Demon I went with HDK which is also offered in PST catalog. The owner of HDK is Hemi Denny from here on FABO. I simply cannot say enough about the quality and level of customer service I have received from HDK. You might look at them Fred as another option. Same offer you can crawl all over mine if you want to see one in the flesh. The quality of welding on the HDK rig was top notch. And it was a bit less dollars than QA1 I do not think you will be disappointed with either of them.
Click to expand...
Morning slo I phoned the Hdk #and the owner picked up no answering machine or secratery,that set up will be 8000$ to my door , nice stuf but hard to spend that kinda cash .
 
The advantages are weight reduction, increased adjust-ability, and maybe(?) durability. Other than weight reduction, the rest could be had with the stock components for a lot less loonies.
 
QA1 has extra caster angle about 3 degrees this makes a big difference in handling and steering wheel recovery , they also have polyurethane bushings where stock ones are rubber . I used to feel every little bump in the road and you would feel it in the steering wheel, what a difference now with the QA1 upper control arms . The uppers are well worth it. Just my opinion .:)
 
fatoldguy said:
QA1 has extra caster angle about 3 degrees this makes a big difference in handling and steering wheel recovery , they also have polyurethane bushings where stock ones are rubber . I used to feel every little bump in the road and you would feel it in the steering wheel, what a difference now with the QA1 upper control arms . The uppers are well worth it. Just my opinion .:)
Click to expand...
Your opinion matters here. Planing on ordering my suspension package soon.
 
Fred Scigliano said:
Your opinion matters here. Planing on ordering my suspension package soon.
Click to expand...
Done it's ordered total with shipping and bend over tax is $2,835.93. QA1 with shocks.
That should piss my girl friend off not gonna be able to take her out to dinner for a few weeks. lol
 
Fred Scigliano said:
Done it's ordered total with shipping and bend over tax is $2,835.93. QA1 with shocks.
That should piss my girl friend off not gonna be able to take her out to dinner for a few weeks. lol
Click to expand...
Glad to see you have your priorities straight Fred. I nice Chili dinner and she'll be butter in your hands.
 
MonkeyMadness said:
That's a wow you're going to have soo much fun installing it :D
Click to expand...
Ya will be fun trying to figure out why I am putting so much money in a scamp instead of something worth some money. But love the body style and my boys would shoot me if I sold it so here we go.
 
fatoldguy said:
QA1 has extra caster angle about 3 degrees this makes a big difference in handling and steering wheel recovery , they also have polyurethane bushings where stock ones are rubber . I used to feel every little bump in the road and you would feel it in the steering wheel, what a difference now with the QA1 upper control arms . The uppers are well worth it. Just my opinion .:)
Click to expand...
You can get that caster with the offset upper control arm bushings. I suppose you would want an aftermarket radius bar too. I wonder what the weight saving is. I would definitely go the QA1 route if I had more money. Borgeson box would be nice too.
 
Fred Scigliano said:
Ya will be fun trying to figure out why I am putting so much money in a scamp instead of something worth some money. But love the body style and my boys would shoot me if I sold it so here we go.
Click to expand...
What are you using for brakes Fred? Had my dry wall hat on today. I'm beat. Got me a man drink. Feels good.
 
You must log in or register to reply here.
-

Back
Top