[FOR SALE] 1973 Dodge Dart Sport Part Out

-
Status
Not open for further replies.

FC7Demon340

Well-Known Member
Joined
Jul 28, 2019
Messages
729
Reaction score
356
Location
West Monroe, La
Rating - 94.4%
17   1   0
Contact seller
I have a 73 Dodge Dart Sport I'm parting out. I'm located in West Monroe, Louisiana. This is a 318, auto, Power steering, manual brakes, nonair car with factory fold down rear seat and rear defrost. The original motor, trans and V8 K member are gone. Someone threw a Slant 6 with 904 and Slant 6 K member inside it. Complete Slant 6 with nice uncut engine harness. The interior plastic is really nice and not dry rotten or cracked anywhere. Front section and frame rails are very solid. Torsion bar brace is solid, trunk pan is solid, floor pans appear to be solid. Doors, roof and 1/4's are pretty well worthless.

List of parts I've already sold.
Aftermarket A/C system - Sold
Wheels - Sold
Upper A arms - Sold
Tail light bezels - Sold
Sail panels - Sold
A Pillar covers - Sold
Heater controls - Sold
Slant 6 engine harness - Sold
Gauges - Sold

Everything else is for sale and not spoken for. You see something you want message me or post here and I'll give you a price on it. All prices do not include shipping. I'll have to figure shipping based on your zip code.

20200110_151832.jpg


20200110_151845.jpg


20200110_160641.jpg


20200111_162201.jpg


20200111_162146.jpg


20200111_162143.jpg
 
Last edited:
Getting ready to cut this car up and haul whats left off to scrap. Just about completely gutted it. Still alot of parts for sale. If there is any sheetmetal you want, you need to speak up soon to give me time to cut it off cause Im hauling it off by the end of next week. I live in the city limits so cars cant stay here long.
 
Cutting the car up this week. If anything you want sheetmetal wise speak up soon cause Friday morning she goes to the shreader. Solid frame rails, solid fender aprons, solid trunk, solid rear floor pans, Solid torsion bar brace. Rockers, 1/4's, doors trunk lid and roof are rusty and no good. Tail panel is rust free but bent up from a pry bar.
 
How about the complete fold down rear seat and intermediate panel, as well as rear compartment "door." All parts, braces, nuts and bolts, fuel fill tube and gasket, rear shelf, soft trim around wheel wells and catches/brackets?
Might require alot of spot welds cut out...?
Let me know..
 
How about the complete fold down rear seat and intermediate panel, as well as rear compartment "door." All parts, braces, nuts and bolts, fuel fill tube and gasket, rear shelf, soft trim around wheel wells and catches/brackets?
Might require alot of spot welds cut out...?
Let me know..
Still have everything for the fold down rear seat. All in excellent shape. $500 plus shipping for everything required to convert to fold down rear seat.
 
Still have everything for the fold down rear seat. All in excellent shape. $500 plus shipping for everything required to convert to fold down rear seat.

Hey! Before I decide to spend the $500, any chance of seeing a couple of pics, for shape and condition and to see all the parts?
 
Hey! Before I decide to spend the $500, any chance of seeing a couple of pics, for shape and condition and to see all the parts?

Here you go, the fuel neck has some damage at the end where someone had a locking gas cap on it. It could be repaired by cutting it loose and rewelding it back together. But as you can see everything else is in excellent shape.

20200119_094233.jpg


20200119_094327.jpg


20200119_094349.jpg


20200119_094358.jpg


20200119_094414.jpg


20200119_094426.jpg


20200119_094438.jpg


20200119_094527.jpg


20200119_094553.jpg


20200119_094556.jpg
 
I bought the UCAs from you off fakebook A body forum. They just showed up friday. Will need to do a little welding on the LH one because of minor sawsall damage. But otherwise they are AoK. No biggie. Looks like that one bolt was a ***** to remove. Thank you for the parts.

Send me a PM , interested in a pair of rear framerail forward sections if they aren't ate up before you scrap it.
 
I bought the UCAs from you off fakebook A body forum. They just showed up friday. Will need to do a little welding on the LH one because of minor sawsall damage. But otherwise they are AoK. No biggie. Looks like that one bolt was a ***** to remove. Thank you for the parts.

Send me a PM , interested in a pair of rear framerail forward sections if they aren't ate up before you scrap it.

Great and yeah that one bolt didnt want to come out for nothing. Had no choice but to cut on it. I tried my best not to cut the arms but couldnt help but nick them a little. I knew they were still ok with a little cleaning. :)

I'll send you a PM on facebook about the frame rails.
 
.

Yeah interior door panel is still intact and AM radio is still up for grabs. It's in nice shape with no cut wires.
Do you have a pic of the driver’s door interior trim panel? What’s the asking price for both (radio and door panel)? Would be shipping to North Florida 32257. Thank you!
 
Last edited:
Status
Not open for further replies.
-
Back
Top