[FOR SALE] Parting 67-9 cuda doors

-
Status
Not open for further replies.
4spdragtop

4spdragtop

FABO Gold Member
FABO Gold Member
Joined
Aug 28, 2009
Messages
39,391
Reaction score
22,633
Location
Ontario Parts Unknown
Rating - 100%
102   0   0
Contact seller
Hi all, after gutting/replacing and installing doors on 69 vert I'm selling off all the door extras I have.
3 front regulators, 2 drivers, 1 pass. All function as they should. 1 ds is Rusty but works.$25 each for clean pr. $15 for rusty one.
2 vent window assy's. One is missing the leading edge chrome, that's a drivers side. That one is $15, comes with vent seal.
Pass side $25.
Linkage rods that run from interior door handle to door latch. 3 total, 1 extra ss.
$25/pr, $15 for spare.
These were removed from 67-9 cudas and will work for all body styles and possibly other models
More to come
All plus ride from Peterborough Ontario
Thanks
Steve

20210429_172326.jpg


20210429_172412.jpg


20210429_172450.jpg
 
Would you by any chance have the guide pins that go in the window tracks?
 
Not at this time. Everyone is out of stock, and they are predicting May or June... meanwhile I'm trying to reassemble my doors and those got lost by the goons who took them apart.
 
Heres what i have. Lemme chk for more as I dont wanna screw myself lol. You can have 2 "H"'s for sure. Top one is really rough.
I gotta sort thru more of the small goods, more to come.
mvh said:
Not at this time. Everyone is out of stock, and they are predicting May or June... meanwhile I'm trying to reassemble my doors and those got lost by the goons who took them apart.
Click to expand...

20210429_211703.jpg


20210429_211812.jpg
 
Unfortunately, I am 250 miles from the car right now, so I don't have an accurate inventory. My understanding is that I have all the regulator hardware, handles, locks, etc. — what is missing is the weatherstripping and guide pins — the "replaceable" parts, except that they aren't replaceable at this particular moment. Basically, the stuff in this photo (not my parts):

The set for one door might be sufficient for right now, though I would take both if you think you have that.

IMG_5541.JPG


I would have just put the old parts back in as a temporary measure, except they seem to have thrown them out.
 
2 H's(4 pcs) will do 1 door glass, 1 set for top and 1 for bottom.
As mentioned, I can only spare 2 H at this time,(dont wanna sell myself short)
Lemme know. I can put in letter mail or ???
mvh said:
Unfortunately, I am 250 miles from the car right now, so I don't have an accurate inventory. My understanding is that I have all the regulator hardware, handles, locks, etc. — what is missing is the weatherstripping and guide pins — the "replaceable" parts, except that they aren't replaceable at this particular moment. Basically, the stuff in this photo (not my parts):

The set for one door might be sufficient for right now, though I would take both if you think you have that.

View attachment 1715730999

I would have just put the old parts back in as a temporary measure, except they seem to have thrown them out.
Click to expand...
 
4spdragtop said:
2 H's(4 pcs) will do 1 door glass, 1 set for top and 1 for bottom.
As mentioned, I can only spare 2 H at this time,(dont wanna sell myself short)
Lemme know. I can put in letter mail or ???
Click to expand...
Do you have the plastic strips as well, in just about any condition, Max (mvh) needs one more as well (two if they are better than this one).
IMG_5613.JPEG



Alan
 
I bot the narrow Velcro pack in sewing dept. I cut down the fuzziest roll,folded it over and saved $100,
 
Hey Joe, explain a little more, what you did? I've been thinking of "alternatives". The end product is hidden anyway, so if it works then perfect.
mocarJoe said:
I bot the narrow Velcro pack in sewing dept. I cut down the fuzziest roll,folded it over and saved $100,
Click to expand...
 
Hardest part was narrowing the Velcro, and folding it while putting it in the channel. Doesn't show and works (so far).
You need to punch holes for those pesky guides.
 
OK, I will take 4 of those H guides (clips, whatever you call them). Thanks!
 
In the mail Mark, thanks!
Bump for the rest.
Any metal needed from the doors? I have plans for some but figured I would offer up before I practice welding on these.
mvh said:
OK, I will take 4 of those H guides (clips, whatever you call them). Thanks!
Click to expand...
 
Not in the high desert of W. Co. Haven't seen 'em on e-pay, Amazin doesn't either. SYL;joe
 
Last yr. I did. Saw them 1 time on e-pay and didn't pull the trigger.
 
Status
Not open for further replies.
-

Back
Top