Solid Roller Lifter ID?

[mopowers]

Can anyone identify these small block mechanical roller lifters? I was told they were Comps, but they don't look like any Comp offers. They look similar to Howards solid rollers, but I measured about 1.5" from the pushrod seat to the end of the roller. Howards advertises 1.756" seat height. Maybe I'm not measuring correctly?

Any ideas what brand lifters these are?

 

[Newbomb Turk]

They aren’t Comp because they don’t use that kind of link bar.

If the wheel is .750 diameter I wouldn’t use them for over 7k and not much more than 250, maybe 260 on the seat.

 

[mopowers]

They aren’t Comp because they don’t use that kind of link bar.

What type of link bar are you referring to? These ones from comp look similar, but not quite the same:

I don't plan on using them at all. Just trying to id them at this point. They look similar to these Howards ones: DODGE Howards Cams 91734 Howards Cams RaceMax Vertical Bar Mechanical Roller Lifters | Summit Racing

 

[Newbomb Turk]

The Comp lifters I’ve seen have a link that isn’t captured.

Maybe Comp has updated their lifters but it was about a month ago I saw them. They didn’t have a captive link bar.

 

[mopowers]

Can anyone ID these lifters?

 

[Ironmike]

I know they are NOT Morrel, or Bamm. That huge oil hole above the waist tells me they are probably Comp's Evolution retro fit series.

 

[mopowers]

I know they are NOT Morrel, or Bamm. That huge oil hole above the waist tells me they are probably Comp's Evolution retro fit series.

Thank you! Here is a picture of the Comp "Endure X" solid roller. I couldn't find anything on an Evolution series.

Looks like the waist has a radius vs the Howard solid rollers more squared off waist: