Looking for unubtanium part ideas

[Dana67Dart]

I can send you the parts. Used ones

Pm me for address

 

[RustyRatRod]

Aluminum, OHC Hemi head for the slant 6.

 

[FlamesAreWicked]

I know the demand is extremely low since disc brake kits are so easily had now but a repop of a drum brake hub. I guess the juice isn’t worth the squeeze for companies to get into it.. while I agree that disc is the way to go but some situations, you may just wanna rebuild stock brakes or maybe you have a damaged hub just on one side, etc.. eh, food for thought

 

[bcschief]

I know the demand is extremely low since disc brake kits are so easily had now but a repop of a drum brake hub. I guess the juice isn’t worth the squeeze for companies to get into it.. while I agree that disc is the way to go but some situations, you may just wanna rebuild stock brakes or maybe you have a damaged hub just on one side, etc.. eh, food for thought

Might be better to have a machinist repair the hub cost wise.

 

[Dana67Dart]

Aluminum, OHC Hemi head for the slant 6

WAY out of my capabilities.

But I was thinking about investigating A body BB exhaust manifolds for 67 and 68 up.

Tony Dagastino commissioned new B and/or E body hard to find good exhaust manifolds.

Some of the low volume quick turn casting techniques might work.

 

[Dana67Dart]

Might be better to have a machinist repair the hub cost wise

I think the cost and liability would be too great.

 

[Dana67Dart]

Keep in mind that parts that could break and kill someone, there is a lot of product liability in there

99% of the parts I make, if they fail for any reason, no one is going to die!

 

[j_anderson]

Sent out a cluster connector to you today.

 

[Dana67Dart]

Sent out a cluster connector to you today.

Ill be looking