225Lancer's latest activity

  • 225Lancer
    225Lancer replied to the thread Rebuilding Slant Six.
    Ok that all makes sense. If the cross hatching looks like crap when we scope, would that be a reason to tear it down and re-hone? I know...
  • 225Lancer
    225Lancer reacted to RustyRatRod's post in the thread Rebuilding Slant Six with
    Thanks!
    Thanks!
    .
    Winner winner chicken dinner. Book spec on the slant 6 is a minimum of 100PSI. The bigger thing other than that you're looking for is...
  • 225Lancer
    225Lancer replied to the thread Rebuilding Slant Six.
    Ok point taken. What route should I take if that isn't the right one? Do a compression test and if it's good leave it completely alone?
  • 225Lancer
    225Lancer reacted to RustyRatRod's post in the thread Rebuilding Slant Six with
    Thanks!
    Thanks!
    .
    Without enhanced exhaust and better intake and carburetor, you may not get as much as you're hoping. The slant 6 needs a very systematic...
  • 225Lancer
    225Lancer reacted to slantsixdan's post in the thread Rebuilding Slant Six with
    Thanks!
    Thanks!
    .
    That makes it a late engine. Early ones have three. That's a '68-'75 engine (or at least block); table is here. You need to make sure...
  • 225Lancer
    225Lancer reacted to halfafish's post in the thread Rebuilding Slant Six with
    Like
    Like
    .
    I am bringing a scope to the party...
  • 225Lancer
    225Lancer replied to the thread Rebuilding Slant Six.
    Ohhh ok thats good to know, I thought it was the other way around for some reason. :realcrazy: Would the adapter ring would be behind...
  • 225Lancer
    225Lancer reacted to Icetech's post in the thread Rebuilding Slant Six with
    Like
    Like
    .
    I would grab a $20 scope and look at the cyls before pulling the head.. good chance you don't need to at all...
  • 225Lancer
    225Lancer reacted to junkyardhero's post in the thread Rebuilding Slant Six with
    Thanks!
    Thanks!
    .
    if the compression and leak down come back withing tolerable levels leave.it.alone. for serious, if that critical part is fine, or...
  • 225Lancer
    225Lancer reacted to nm9stheham's post in the thread Rebuilding Slant Six with
    Thanks!
    Thanks!
    .
    OP, the inside of that engine's valve area is very clean. IMHO, this may have already been gone through, at least in the head area. As...
  • 225Lancer
    225Lancer reacted to RustyRatRod's post in the thread Rebuilding Slant Six with
    Like
    Like
    .
    I didn't hit any drugs until I was out of school...for whatever reason. I made up for it though. lol
  • 225Lancer
    225Lancer replied to the thread Rebuilding Slant Six.
    Yeah I'm not looking for a long rod build right now lol. Ok good to know. Ok that's definitely good info, good thing I didn't order...
  • 225Lancer
    225Lancer reacted to TT5.9mag's post in the thread Rebuilding Slant Six with
    Like
    Like
    .
    Good on ya! Let us know what you find.
  • 225Lancer
    225Lancer reacted to dr dodge's post in the thread Rebuilding Slant Six with
    Like
    Like
    .
    I just smoked pot and drank beer, wreck snowmobiles, and generally was a s..t head... :lol: but my dad had a 74 dart sport, and mom had...
  • 225Lancer
    225Lancer replied to the thread Rebuilding Slant Six.
    I'm wanting it to be easily daily drivable, but when I lay into it I want it to give a little more power back than it does right now.
Back
Top Bottom