Recent content by 68Dartvader

Tag

The heater and vent controls do not have the wood grain sticker

Ashtray

Glove box

67 dart has what appears Wood grain sticker on the glove box, ashtray, and lower part of the speedometer consul. Is this correct or did some one put this on layer in life?

Bam thanks for the link. It is listed under the misc steering wheel clock link ..with a picture of the clock in the package. the clock has no tic or tock. But it is sure cool. Maybe one day I'll sell it Thank all

Ok so took it off thanks for the help. So the back says do not remove from the case do you think it'll void the warranty?

Anyone seen this before if so how do i remove it to take it to a click shop Off a 67 dart

To me it looks like in picture 2 the #1 wire is running to the left #8. So move all your wires by one and see what you get. I did this a couple of months ago see my previous post

lot of good help here. make sure #1 spark plug wire is in the correct spot on the cap. i know this ☺☺☺ because mine wss not had same issue. #1 was in #8.

no not warm when i took the readings. i have the screw in will run some more numbers tomarrow. love a 4 day weekend!

all work and no play!! got a it set 14 BTDC No red hot exaust manifold! power seems to be there. will have to runn it a bit longer to make sure

here are some compression readings driver side # 1 110, # 3 105, #5 120, # 7 105.. .passanger side # 2 125, #4 110, # 6 112, #8 120. quite a spread thoughrs

Right on will pull some numbers tomorrow. Today messing around took another stab at it . And i i am glad to hear do not use the vacuum gague! Thanks will post more tomorrow!

It has a "hot cam" I have no idea what cam is installed so was really loopie to start. It ran ok just no power. #1 was in #8 on the cap so it was retarded . But still ran . Even ran when the #7 spark plug wire was melting and then on fire. Lol