Recent content by 69DarttoArt

The headlights are called SICK (name brand) and a guy makes them one at a time in the state of Washington, I believe. $415 a piece, very spendy!!! To rich for my wallet.

Easy, one last thing, was they sold us a Corvette fuel filter on it with the required fuel return line on it.

Easy, we got ours from Modern Muscle, but we paid way too much for what they did. We should've bought a stock tank and bought an in tank pump and did it myself. We bought the fuel line system from Buchillon Performance out of South Carolina and that help out a lot. It has a nice orange silicone...

Thxs guys, yes the owner took care of me. Its hard to find an owner that doesn't run out of funds halfway thru a project like this.

Thanks to all for your kind words, it really does help, it was a whole lot of work and almost 3 years of my spare time. Here are some pics I found time to compress.

Thank you Hemfish69, I got it figured out. I had an weak in-line fuse upstream of the fuse panel coming off the ignition, which was the fuse I was blowing. I rerouted that fuse, over where it belongs in front of the dash gages and after that, I turned on the wipers and they worked on Low and on...

Yes please, I made some headway today, after my owner told me that the new wiper motors are internally resisted (I forgot there was a note about that when I pulled it out of the box). So I ran the brown wire to the A post on switch and got the wipers to move then blew another fuse. I must be...

Here are those schematics of the wiper motor and back of switch I spoke about. I only have (4) connections on the wiper motor, unless I wire #3 to a resistor, then that would get me two more connections to bring inside the car. It looks like its all figured out, but it is not, I blew fuses when...

Gary, that is very close to all the stuff I put in this, except the 545RFE 5 speed auto tranny. You won't believe how I ended up mounting our accelerator pedal. It wanted to be mounted right on top of the corner of the steering column trim ring, so I welded a nut to the corner and bolted it...

Hi guys, I have been slaving away on the Dart all Winter, Spring and Summer. I gave it to the owner 2 days before the Mopar Nationals at Woodburn Dragstrip out here in Oregon. He waxed it on Saturday and took it out and took 2nd place in A-Body Modified. I got it back for a week and a half...

Hey guys, I was just going to ask the same thing. I got Russ Francis wiring to send the original schematic, but it shows (5) connections coming off the wiper motor and I only have (4), but I was going to ask about the resistor, that would make it (5). I tried to hook them all up to the wiper...

Thank you guys, so two should do it then, one one each side of center? Oops, no I just went and looked and there are two thinner 5-6" long clips, pooked in two holes of the back roof area right now. The two in the picture are only 2-1/2" long and heavier guage, say like .090". Here's what I just...

Hi all, I am getting ready to install the headliner and am worried these clips might be involved in the headliner bows somehow. Does anyone know where these clips actually belong? How many am I suppose to have, I think I have seen just two laying around. See photo copy of clip below. I also...

They need the O2 sensors plugged in and in the exhaust stream, you could plug them in then use wire to wire them across the end of manifolds, attaching them to the studs. That should get you running safely without the over rich situation or worse yet, leaning it out. Our 6.1 has been starting...

Swifter, The owner came by yesterday and loves the Blue Hoses and told me to tell you he is an artist and loves the blue accent it adds to the build. Same color as the front A-arms. Like I said, some dig them, some don't, I can't please everyone, but pleasing the owner is important to...