Recent content by 71RALLYEDART

Ok thank you

can a universal evaporator temp switch be used on a 71 dart with a new style compressor using r134a?

I need an evaporator temperature switch for a 71 dart

Ok thanks the 1 thing I forgot to add is that when I first start driving it will just about coolenough but after about a half an hour it’s not very cool at all

I have a 71 Dart. I did a R134 a/c conversion on an original a/c car. The a/c compressor cycles about every 30 seconds. I had it checked by a few shops they drained the refrigerant checked for leaks and refilled it and I have the same issue. What should I be checking next? I also jumped the...

I have a standard woodgrain one if you are interested.

Yeah I have the 4.35 hole

130 tooth I think

My bearing retainer is 5.18. My flywheel and cluch are new, and Im converting to an od trans and don't want to change all of that

Im looking for a small block 10.5 o/d bell housing. Thanks

The bearing housing opening is 5 1/8"

Sorry I forgot. A v8

I am looking for an a833 abody bellhousing. I have a few things that I can trade or I can buy it . I have a 83\4 non abody rear that needs to be gone through not sure of the width but I will get it, a non overdrive bellhousing, also I have a long tailshaft a833 that needs a rebuild.

A bell housing from a non od won't work on that trans correct? If so I would still be interested.

Also do you have the small block bell housing for it?