AJ/FormS's latest activity
-
I ended up cutting the crossover. I'll make up a removeable section with some band clamps. It will be nice if I ever have to do the clutch. -
AJ/FormS replied to the thread Idling hot.Just so you know what's possible; once up to operating temp, my system runs at 207*F exactly, no matter what; never more. I can even...
-
Thanks for the real world examples/question. No parades; my cruising the local 'loop' from one end of town to the other trying to...
-
AJ/FormS replied to the thread A833 leaks.FYI; I cut my H-pipe out to fit a GVod. That enabled me to take my aluminum-cased trans down in 17 minutes, on a 4-post drive-on lift...
-
AJ/FormS replied to the thread Adult swim.How slow do you expect to drive? Do you want to Parade? >Assuming; 4.11s. and 27"tires, 900rpm would be; 6.1 mph, with the 2.87 low...
-
AJ/FormS replied to the thread A833 leaks.As to problem #1 That is highly unusual for a Non-overdrive to be leaking there. But I have a guess. When a NEW front bearing is...
-
AJ/FormS replied to the thread 383 new rebuilt starting issue.Check in the Bellhousing; there are several things in there that can make grindingish noises. I know that won't solve your metal in the...
-
AJ/FormS replied to the thread Spark Plug Gap.Plus, to regap an 035 plug to say 045, you sorta need the right tool, else the strap ends up angled, and the spark may originate in the...
-
AJ/FormS replied to the thread A833OD Aluminum Case - Part Of The Bearing Retainer Broke Off?.That's an overdrive right. In the highest gear power actually goes down to the cluster first, then back up into the tiny overdrive gear...
-
AJ/FormS replied to the thread Thoughts on fuel economy.I beg to differ. If yur only targeting a couple of mpg, ok sure, I get you. But why settle for sub-20s mpg, when it only takes...
-
AJ/FormS replied to the thread TTI Exhaust.You already own the 3". Race cars run open headers; is that too big? I installed the 3" on my 367, in 1999, and I've never been sorry.
-
There's no such thing as too big. Just ask a woman.
-
AJ/FormS replied to the thread Carb choice.On the street? the factory 2bbl. EDIT; think about it. You didn't say; 1) that you pumped the compression up, 2) nor that you...
-
AJ/FormS replied to the thread Swapping '69 273 with '84 318 Into My 1969 Dart.Are you sure? The 273 is a 1969 model.
-
AJ/FormS replied to the thread Swapping '69 273 with '84 318 Into My 1969 Dart.No, for 318s, the stock gaskets were usually steel shim, .020. The .069 number would be the deck clearance, which is how far below the...