AJ/FormS's latest activity
-
AJ/FormS replied to the thread Cracks between head bolts and coolant passages.If you want power out of a 318, yur gunna have to increase the Cylinder Pressure anyway, and that's gunna take high compression pistons... -
Thank u , sorry I just replied an had not been back on since post 8. A see all the people responding a wanted to clear things up ...
-
AJ/FormS replied to the thread A833 leaks.That works because the Second gear brass is still working and it stops the guts from spinning, then the First gear brass has nothing to...
-
AJ/FormS replied to the thread A833 leaks.Yeah that was discussed earlier. Start with more clutch departure. Perhaps your disc is warped, swollen, or bent, or just out of...
-
AJ/FormS replied to the thread A833 leaks.No, you overshifted it. You'll have to gently nudge those struts back home, into the notches, one atta time. Make sure the energizer...
-
AJ/FormS replied to the thread 74 Duster 408 Daily Drivability with 3.73 Gears Vs Stock 3.21 Question..The original 4-speed should have the T/A ratios. namely; 2.47-1.77-1.34-1.00. This is a close ratio unit, sooooo you gotta watch your...
-
Check that the secondaries are fully closed while running.
-
I ended up cutting the crossover. I'll make up a removeable section with some band clamps. It will be nice if I ever have to do the clutch.
-
AJ/FormS replied to the thread Idling hot.Just so you know what's possible; once up to operating temp, my system runs at 207*F exactly, no matter what; never more. I can even...
-
Thanks for the real world examples/question. No parades; my cruising the local 'loop' from one end of town to the other trying to...
-
AJ/FormS replied to the thread A833 leaks.FYI; I cut my H-pipe out to fit a GVod. That enabled me to take my aluminum-cased trans down in 17 minutes, on a 4-post drive-on lift...
-
AJ/FormS replied to the thread Adult swim.How slow do you expect to drive? Do you want to Parade? >Assuming; 4.11s. and 27"tires, 900rpm would be; 6.1 mph, with the 2.87 low...
-
AJ/FormS replied to the thread A833 leaks.As to problem #1 That is highly unusual for a Non-overdrive to be leaking there. But I have a guess. When a NEW front bearing is...
-
AJ/FormS replied to the thread 383 new rebuilt starting issue.Check in the Bellhousing; there are several things in there that can make grindingish noises. I know that won't solve your metal in the...