Recent content by Arizona

Thanks. I wondered what the button with the spring was for. Didn't think to try it though. :)

Thanks, that looks like the one.

My '65 Dart's headlight switch was not in the dash when I got the car and there was no 'nut' or whatever fastener is supposed to hold the switch in place. Can anyone point me to the item? I also have to get a new switch and the new ones at NAPA etc don't have a shaft on them. Can the shaft...

That is 1965. Looks like 3 of the 4 "pins" are broken, which is surprising. Normally they are all broken off when it is removed. The way they were installed is bizarre imo. There were metal "push nuts" on the pins that were then glued or epoxied on for some strange reason. The second you put a...

I have seen those. The b/w version in the shop manual is good enough, easy to follow. Thanks

Yes, of course that isn't original... as I said I have a good harness, just wondering what the routing was and how stuff is mounted. Sorry for the confusion.

Don't know why but I can't get to the links. Site says I don't have permission.

Thanks. That will help a lot! That is one beautiful Barracuda. My Barracuda was a '68.

Yes, I stripped it all out and painted inside the bay. I have one or two good harnesses, just looking for routing. WV64Signet posted pics that will help a lot.

That is really good. Thanks!

What do you mean "early A's don't look like that"? It is a '65 Dart. Who knows what was done to if by the last owner. That is why I would like pictures showing where things are mounted on the firewall etc. Thanks

This is what the wiring in my Dart looked like when I got it. I have installed a good harness under the dash and am ready to do the engine bay. I have 2-3 full?/partial harnesses but am not sure what the correct routing is. If anyone could take pics of where things like relays etc were located...

I can't find a rubber mount that is as short as oem - the ones they sell now are too tall by about 3/4". I have the same problem as you if I change out the mount.... :( so I have the original mount in mine....

I need a driver's side lower hinge that is in decent shape. Please let me know if you have one. Please include the price and shipping to 85233. If I find one then I will have an extra passenger side lower hinge. That is what is on the driver's side now, mounted upside down, without the S bar...

No, I don’t have anything at all. I can get the cable and housing (reproduction) but don’t know about the gear/ clip.