Recent content by Austinr7

Hi i have a 1968 Plymouth Barracuda. Original 318, Auto 727. Original 24K miles. Runs, drives and stops. Has a new 2 barrel carb, starter, alternator, brake lines, gas line, master cylinder, New drum brakes all the way around. Interior is all refinished. Paint is starting to chip in a few spots...

Thanks everyone! Gonna get a new hose and try that first if that dont work gonna check master cylinder

I do have pedal but its for the front brakes and hace none for the rear. That was my next thing i was going to was pull master back out and check it and bench bleed it again

Okay sorry about that. So one side does have a new master cylinder and bleeder on it RR and on LR it has the old wheel cylinder, but i have no fluid

I have a 1968 plymouth barracuda. 318. Manual brakes. I put a new master cylinder on. Bench bled it before install. New brake lines. Tried bleeding and broke bleeder. Installed new brake cylinder on right rear. No fluid at all checked other side nothing. Check front just for the hell of it and...

Yes it is sorry should have posted that in there!

Hi im looking to see if anyone can tell me what transmission i have off from the codes on a build sheet. Its a 1968 plymouth barracuda 2dr hardtop fastback. With a 318. The codes I have for transmission are pme is 5 and the other is 029