Recent content by bd2595

Standard Steering wheel off my 1973 Duster 340, which for my model with the A88 fender code was not the correct one. $50 plus shipping charges.

Purchased this Instrument Cluster as a temporary cluster while having mine restored. I never needed to install it so I am not 100% sure what works correctly. $100 plus shipping charges.

I am working to make my 1973 Duster 340 as close to matching stock/fender tag as I can. It is actually in great shape mechanically and body wise so a lot of little annoying things. As you can see from the Fender Tag it has the V21 Performance Hood. I do not think that meant hood pins or hood...

Adapter sounds like the way to go. There are SO many issues with this car that I am not sure the starter was the problem. Everything done on it was done poorly.

So it's better to drill put the cable slightly to fit

These were not intended to be starter pictures, they were of me replacing the butchered clutch parts but there is some view of the starter. I will need to get more tonight.

I ordered a new battery cable for my Duster from TNT Parts. It is supposed to be an OEM cable. When I attempted to install it only one of the connections at the battery would work, the other (smaller one) was too large to fit over the post on the starter. The starter seems to be small for...

I think I figured it out. I think the center emblem from the standard wheel will fit the deluxe center. Thanks for all the help!!

Thanks for all the responses! I was able to find the correct wheel based on the picture above but with no center emblem. I have not been able to find any pictures of examples of a wheel with the center emblem that is not the fratzog. I did find a wheel with the Plymouth emblem (2nd picture)...

Follow on question. Fender tag indicates that I have the A88 Decor group, information online indicates the deluxe steering wheel is part of that. Is that correct?

I purchased a 1973 Duster 340 almost 3 months ago. The seller was having health issues and was not able to finish a lot on the car. I removed the steering column for rebuild because the coupler needed to be rebuilt and I needed to send the instrument cluster and gauges for rebuild. I have the...

Yes that is the door.

I have a 1973 Duster 340, I removed the heater box to rebuild. I had not noticed it is missing the vent door. I is different from the driver side door so I can't just find one of those. I will buy the whole heater box if it has a working vent door and is in decent condition.

I am looking for the heater box, more correct the vent door for the heater box.

Here are the pictures. The black wire from the actual switch was attached (barely with one strand) to one side of the end of the diode. The other end of the diode had no wire, but you can see there was a wire on it at one time. I am going to try to reattach as I said and finding another would...