Recent content by BLP

Thanks good to hear, I 'll give that a go. Contacted comp cams, they never replied?

I actually printed that recipe and was going to use it. But as I stated above the plan changed a little. Had to buy pistons so why not get a set perched a little higher in the bore? Also after the plan, iron manifolds came into the picture, they were donated to the build by a friend, I want to...

I appreciate the help. This Cam stuff make me dizzy. thinking one of these two summit 6400 Cam Style:Hydraulic flat tappet Basic Operating RPM Range:1,500-5,000 Intake Duration at 050 inch Lift:214 Exhaust Duration at 050 inch Lift:224 Duration at 050 inch Lift:214 int./224 exh. Advertised...

What is RMS? The cruise is easy 2K give or take a little. The iron manifolds and the FI is the banana peel for me. Thats where I'm not following the lo-po recipe that I originally intend to do.

thanks guys, check big block a body tech for a couple pics

Yes, what you say makes sense. I'm hoping the "never quick enough" fever doesn't take hold again.

Checking on the cams recommended I'm thinking the overdrive with a 3.23 gear might be setting the interstate cruise rpm too low for the engine to be happy? So saving a couple hundred on a gear set might be not the way to go. Maybe 3.91? The plan was on the engine was to do exactly what IQ 52...

lets see if I can post a couple the little hole kept getting bigger so we added some scrap pipe added a little here sub frame connectors added in made the stripes And thanks Guys for the cam input

FI Tech fuel injection

I know this has been beat to death but being a new guy here I didn’t want to jump on another’s post. What I’m working with … 400 with a 383 forged crank KB 240 pistons. Approx 9 to 1 compression. 452 heads will be opened on the cheap, because I’m cheap. Stock rocker set up. HP iron...

Have been trolling the site for years thought I'd check in. Working on/building bikes for years but the latest victim is a 70 Dart, nice, basically rust free completely unmolested rig less the drive train. It followed me home a couple years ago. Molestation is currently underway.. I'll thank...