Recent content by brian 1972

ok all park lights work. the right rear turn signal works, the left front turn signal light works but the other 2 turn signals dont. all four of the hazards work checked at the steering column 2 wires blink at the connection those 2 wires go up to hazard switch but were does the wire come...

i actually fixed it using a piece of 12-2 house electric wire it fit perfectly in the hole were the pins broke soldered onto the board and put solder on the backside to help hold it hooked it up seems to work. i'll put pic up tomorrow maybe help someone in the future

their not there cant find them anywhere

i removed the dash from my 68 barracuda and 2 of the prongs on the back of the circuit board was broke off gone wondering if theres a way to fix it

thanks everyone for the info

yea i have stopped on it til i figure something out u say u moved the shifter toward the back of the car a few inches u like it pretty good like that

did you use the shifter adapter

the tranny i bought was from a salvage yard was told it was out of a truck 84-85 model all i know of it

i have never had the arms off is it upside down

here is what i'm dealing with have 2 linkages hooked up but out of rom for the 3rd

i'll get pic in the morning

installed a four speed tranny in a 68 barracuda the tranny was an e model fixed a adapter plate moved the shifter forward from the tailshaft now the cross member is in the way of the shifter linkage any on have suggestions to how to run the linkage

i'll take a pic tomorrow thanks

someone put roller rockers in a 340 engine that came in a 68 barracuda the engine was supposed to been built for racing but i dont know it has had modifications done to it the car has a setup for drag racing but anyway the roller rockers are going down to far and hitting the valve springs what...

thanks for the help