Have a 70 dart swinger with power brakes. Front disc and rear drums. The booster is small and original to the car, I am thinking a 8 inch booster. The booster diaphram is shot. Where is a good place to buy a booster. The MC is brand new.
I'am getting ready to rebuild my power steering box. I'am undecided where to send it to. Firm feel,steer and gear. Any good suggestions on where to send the box. Thanks ken
Hello. Just put a new rebuilt power steering box on my 70 swinger. It is fairly positive driving down the road. What would be some good camber and caster settings. I am running radial tires.
Hello. I have a 70 swinger 340. Dose anyone know how hot the oil in the power steering pump reservoir should get. I took the car for a spin the other day and put my hand on the back of the pump. It was pretty dam hot. Thanks Ken
Hello. Just put my centerforce II clutch and preasure plate in the car with a skf through out bearing. Having trouble setting up the clutch. If I set the clutch up so that the bearing is about 50 thou from the preasure plate I can not get the transmition in Rev. Al the other gears are a little...
Just finishing installing carpet from ledgendary in my 70 dart bucket seat 4 spd. The carpet came from trim parts. Had to work like hell to get it to fit properley. Was not that impressed. Had to do a lot of glueing to make it look good. Should not have to do that with molded carpet. Where is a...
Working on a 70 swinger. Did the original package tray have two buttons just beside the 6x9 speaker holes to hold the cardboard tray to the metal tray. I found 2 buttons that were pushed in a 1/4 inch hole. The new package trays have no holes in them. May have to drill them . Thanks Ken
Hello. Dose anyone know where the clutch switch is mounted on a 70 4 spd 340 car. Mine was never there. If any one has pixs that would be apreciated. Thanks Ken
Hello. I have 2 H code 70 dart swingers. The 4 speed is early production and the front of the rear leef springs is boxed in. The auto matic swinger is late production and the front of the rear spring is not boxed in. Whats with that. Most 318 cars are not boxed in. Thanks Ken