Ceedawg's latest activity

  • Ceedawg
    Ceedawg reacted to A body's post in the thread 904 race builds with
    Like
    Like
    .
    Custom Torque Converters for Drag Racing - Ultimate Converter Concepts Montgomery Ragland took the business over. Haven’t dealt with him...
  • Ceedawg
    Ceedawg replied to the thread 904 race builds.
    On a stock VB yes, reverse manual no unless it’s a low band apply reverse manual VB
  • Ceedawg
    Ceedawg replied to the thread 904 race builds.
    Where are they located? How much did that cost?
  • Ceedawg
    Ceedawg replied to the thread 904 race builds.
    I found the flat hub unit is a bigger diameter than the lug type. Is it milled down to fit pump housing or housing milled out bigger? My...
  • Ceedawg
    Ceedawg reacted to A body's post in the thread 904 race builds with
    Like
    Like
    .
    I prefer the A500 style pump gear. Still hear about cracked converter drive hubs today. 904>727…. Simple mopar math. Run the stock...
  • Ceedawg
    Ceedawg reacted to nckennyb's post in the thread 904 race builds with
    Like
    Like
    .
    If you are using the lockup trans sun and planets, that should be the low gear set. I think all lockups had the low gears. That's where...
  • Ceedawg
    Ceedawg reacted to crackedback's post in the thread 904 race builds with
    Like
    Like
    .
    Kevlar was what he ran. Look at the cost of a std and kevlar, not that far apart now as far as I know.
  • Ceedawg
    Ceedawg reacted to RustyRatRod's post in the thread 904 race builds with
    Like
    Like
    .
    I wouldn't consider my 904 as "race" but here's what I did. I utilized a five clutch forward drum, I got the widest band in there I...
  • Ceedawg
    Ceedawg reacted to mshred's post in the thread 904 race builds with
    Like
    Like
    .
    Sounds good to me! I ran 9.70's with nitrous and lots of street miles in a 3400lb car with a 904 that had pretty much what you...
  • Ceedawg
    Ceedawg replied to the thread 904 race builds.
    I knew that from the start. I’ll address the issues on the front pump this weekend then wait for those this frictions and steels to...
  • Ceedawg
    Ceedawg replied to the thread 904 race builds.
    Why do they need one? I’ve never in 55 years of racing 727s seen one fail. Never seen a strut fail. Why does it need a Kevlar band in...
  • Ceedawg
    Ceedawg replied to the thread 904 race builds.
    Early trans, 72 I think after seeing the date. People don’t always tell the truth.
  • Ceedawg
    Ceedawg reacted to Locomotion's post in the thread 904 torqueflite identification PLEASE ??? with
    Thanks!
    Thanks!
    .
    Not sure exactly when 904 transmissions went to a lock-up torque converter, may have been in 1978 or a little later. You can't swap...
  • Ceedawg
    Ceedawg replied to the thread 904 race builds.
    I got those numbers and I’ll look later today.
  • Ceedawg
    Ceedawg replied to the thread 904 race builds.
    I might have to run some type of shield, rules, anything faster than 11.00
Show older items
Back
Top Bottom