Ceedawg's latest activity
-
904 in my car. They can take a lot of power if built properly. I will try to find the parts list. It was built 10 years ago. -
Ceedawg replied to the thread 904 race builds.Update on what I have, 78 case, steel planets and their parts, 4 drum with the five thin plates, flat type pump, TA forward pattern VB...
-
Ceedawg replied to the thread 904 race builds.Great info, I’m glad someone like you went to the trouble of getting the facts straight. I’ll use the guts from input back from the lock...
-
Just to follow up on a few things. As I mentioned above, the wide 5 clutch drums can only be found in an A999 (both lockup or non). The...
-
You probably don't need roller stuff for that ET. What year is the trans? A late '70s-early '80s lockup unit is probably not where you...
-
That is not nearly as bad as a 727 is. I have never heard of a 904 drum exploding, but I am sure it could happen.
-
Ceedawg replied to the thread 904 race builds.Thanks, I’m using a later case that has the larger servo, the steel planets and parts out of the lock up, regular pump housing-input. TA...
-
Needing all input on what to do to trans. From roller bearings to clutch discs. What works for you. 340 running high 10s to 11.0
-
"JC" = Joe Chrisman of TranZact of Indy. He made valve bodies for TCI as well. If it is a Rev Manual VB, the TCI equivalent is model...
-
Does anyone have an extra spider for the Magnum roller lifters? The thing that bolts in vally
-
Ceedawg replied to the thread Show us your home made tools.Make one another half bigger
-
My clutch fan pulley holder tool. I'm replacing the heads on my 2000 van. I'm not sure if the water pump had to come off, but...
-
Ceedawg replied to the thread [WANTED] Braided line.I need about 5/8” inside (not sure what size that would be) I’m sliding the 1/2” aluminum tubing inside so I can use short pieces of SS...
-
Looking for a length of used braided line, 5/8” INSIDE that I can put my 1/2” aluminum gas line in. This is to protect the line around...