Recent content by DesertBilly

Will the fenders interchange? They look the same just trying to locate a passenger fender thanks.

Just concerned about the front

Thanks for the reply I'll look into it but the part I'm talking about is where the seal wraps around timing cover and pan.... I used this same gasket years ago milodon 41007 and it sealed just fin just not sure if the gasket has changed or the old one just formed in to the pan and timing cover...

Anyone?

So I know in there description it says it only fits magnum motors. But I put one on my la 360 back in 2014 and it fit perfect no leaks on an aftermarket pan. So I'm doing a pan change because the old one cracked (it was a milodon by the way which was already repaired once) a d looking at the old...

Are you running a brake also

Sure, I'm in north Peoria. The car is a 66 valiant street/strip car but it's mostly strip. It has a 408 with indybrock heads, 904 trans that's being rebuilt, 8 3/4 with limited slip 3.55 gear. I also have another car thats a street/strip car I mostly race as I just purchased the valiant from my...

Hey guys longtime member and lurker here. I'm currently rebuilding my trans in my bracket car and doing a some upgrades at the moment including installing a trans brake from CRT. CRT recommends not using the deep steel pan because they can get dented and interfere with the brake and I read that...

Are those centerline wheels

Yeah it needs to be charged and leak checked

Pics Posted via Topify on Android

Hey guys been lurking awhile just thought I'd share the new slant project its not my first mopar I also have a coronet that I race and drive on the street but I me an d my dad picked this up last night for 800 buck and he cleaned it up for me while I was at work today and the thing is mint it...

the radiators on those also like to plug cause the lower hose is up high on those radiators. or the impeller could be spinning on the water pump shaft seen that to.

nice thank you!

hey all i know i dont post much but quick question regarding aftermarket axles. recently when resealing the 8 3/4 we noticed are axles are twisted. anyways we decided to upgrade the axles to moser's and put the non adjustable green bearings in it. now the question is do we need to use the two...