Recent content by Dizzydean

Looking for a set of .060 pistons for a 383

pm sent

Exactly what im looking for

Im looking for a set of BB rockers complete with push rods. Solid or hyd not important just as long as its a set needs to have the shafts also.

Good day, any idea on shipping to 99352 Richland WA. Thanks. Dean

Looks like an electric pump is next. any tips on the flow rate for a lightly modified 6?

i tried this and the result was the same little to no flow, i even took the pump off and reinstalled still no better, So it looks like the electric is my next move. Any tips on the flow rate for a lightly modified 6?

Thank you guys for the input. Items I forgot to include: Tank and sending unit are both new, all rubber lines were replaced, I also cleaned the steel line using brake clean then blowing it out before installing everything, fuel pump was replaced week. Still having the same issue with the new pump.

Good Day, I am having a fuel issue and not sure what to check next. After driving about 45-60 mins the car stalls and my filter is dry. I have the 5/16 line from tank to pump then i had 3/8 to the carb. I have switched to 5/16 all the way, replaced the pump, blew air from the tank going forward...

Try Vintiques they have a small assortment

Thank you

Looking for a set of steel wheels in the small bolt pattern 15x7 and 6's. Located in eastern washington

message sent

Interested if you still have them.

Talked to the Dr. the axels will not interchange.